ADDITOL® XL 123 N by allnex is a flow agent and defoamer based on a modified silicone oil for air drying systems. It is suitable for solvent-borne coating systems to increase slip, crack and scratch... view more

ADDITOL® XL 255 N by allnex is an electroneutral wetting and dispersing agent. It reduces flocculation in common organic and inorganic pigments used in air drying systems. It provides increased... view more

ADDITOL® XL 480 by allnex is a leveling agent without addition of silicone. It is amine resin modified acrylic copolymer. It may be used with any type of paint material such as on the basis of... view more

ADDITOL® XL 490 by allnex is a leveling and anti-crater agent for enhancing the surface quality of paint film, without silicone addition. It is used in powder coatings systems on binder systems such... view more

ADDITOL® XW 6567 by allnex is a modified hydrocarbon-based defoamer for waterborne epoxy & phenolic systems used in B&B, DWI, general line containers, caps, closures and aerosol industry. It is... view more

ULTRAFIL COMPOUND UV by Pidilite Industries is filler and waxes along with special additives especially designed for upgradation and improvement in feel of the leather. This wax cum filler improves... view more

Dantocol® DHE by Arxada acts as a curing agent. It is a high-temperature resistant polyester or modified imide-amide. Dantocol® DHE is designed for wire enamels and specialty coatings including... view more

Lonzacure® M-CDEA by Arxada acts as a curing agent for epoxides in chemical-resistant coatings. Provides very good dynamics, temperature resistance, low water absorption, and hydrolytic and light... view more

Lonzacure® M-DEA by Arxada is an epoxy curing agent for chemical-resistant coatings. Offers very good chemical stability against acidic and basic reagents, high Tg (up to 200°C in combination with... view more

CAB-O-SIL® TS-710 by Cabot is a polydimethylsiloxane (PDMS) modified, low surface area fumed silica. Acts as a thickener. Compatible with epoxy, polyurethane and vinyl ester resins. Provides easy... view more

Chiguard® 1152 by Chitec Technology is a low alkalinity reactable N-OR hindered amine light (HAL) stabilizer. It can chemically bond to polymers with OH groups in the structure. It is non-migrating, resistant... view more

Chiguard® R-455 by Chitec Technology is a novel reactive benzotriazole UV absorber (UVA). It contains a propanediol group that allows it to chemically bond to the backbone of various polymers. It can react with... view more

Chiguard® U-9310 by Chitec Technology is a liquid functional UV stabilizer. It offers thermal stability and photostability to TPU during processing and in the end-uses. Chiguard® U-9310 is recommended for PU- and epoxy... view more

ECO Brij™ C2 by Croda is a 100% bio-based, non-ionic surfactant. It is used as a versatile co-emulsifier for O/W emulsions wetting agent, dispersing agent and solubilizer. It is produced from... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more