Sicomin® Yellow L 1635 S by Sun Chemical (DIC) is lead sulfo chromate inorganic pigment. The heat stability depends on the binder and solvent system used. It is used when the emphasis is on economy... view more

Sicomin® Yellow L 1835 S by Sun Chemical (DIC) is lead sulfo chromate inorganic pigment. The heat stability depends on the binder and solvent system used. It is used when the emphasis is on economy... view more

Sicomin® Yellow L 1922 by Sun Chemical (DIC is a lead sulfo chromate. It is an inorganic pigment. It is not a mixture of lead chromate and lead sulfate and is, for stabilization purposes, coated... view more

Sicomin® Yellow L 1922 Type U by Sun Chemical (DIC) is lead sulfo chromate inorganic pigment. It is a mixture of chrome yellow lead chromate pigment and barium chromate stabilized with a silicate... view more

Sicomin® Yellow L 1925 by Sun Chemical (DIC) is lead sulfo chromate inorganic pigment. It consists of mixed crystals consisting of lead chromate and lead sulfate. It is not a mixture of lead... view more

Touch DISPER 8554 by Touch Chem is a high molecular weight carboxylic acid salts. Acts as wetting- and dispersing agent. It also acts as a good activator for bentonite gel. Provides reduced dispersion time... view more

Aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). Used in coil coatings. Offers improved water, saltspray and detergent resistance. Possesses higher electrical resistance and... view more

Highly efficient silicone free defoamer and antifoam agent. Used in coil coatings, floor coatings, air drying wood and metal coatings including printing inks... view more

WorleeAdd® 480 N by Worlee is a specially modified epoxy ester. Acts as an adhesion promoter. Provides positive influence on corrosion resistance. Improves the adhesion on metals, glass and... view more

WorléeAdd® 781 by Worlée is a hydroxy functional polyester. It is a silicon-free leveling agent. Improves leveling, elasticity and adhesion. May reduce blistering in thick layer two-pack PU coatings... view more

CAD-2000 by Yangzhou Chenhua New Material is polyether amine-based curing agent. It shows low viscosity, chroma and vapor pressure. It is recommended for wind power blade and cathodic... view more

CAD-230 by Yangzhou Chenhua New Material is polyether amine-based curing agent. It shows low viscosity, chroma and vapor pressure. It exhibits improved flexibility and increased peel strength. It is... view more

CAD-400 by Yangzhou Chenhua New Material is polyether amine-based curing agent. It exhibits improved flexibility and increased peel strength. It shows low viscosity, chroma and vapor pressure... view more

ADDITOL® XL 6583 by allnex is dispersant for paints with sensitive cure mechanism (e.g., acid or base catalyzed). It stabilizes primary pigment particles by steric stabilization as well as... view more