ADDITOL® XL 180 by allnex enhances intercoat adhesion of stoving paints and fast drying air-drying paints on white electrodeposition paints and primers. This grade is special phosphoric acid ester... view more

ADDITOL® XW 376 by allnex is a pre-emulsified, defoamer for waterborne emulsion paints. It provides good storage stability even at elevated temperatures. It is effective in large to fine particle... view more

ADDITOL® XW 390 by allnex is a flow and wetting agent without silicone addition. It prevents flow defects and promotes substrate wetting. It is used in air-drying and stoving waterborne coating... view more

ADDITOL® XW 6533 by allnex is a water-emulsifiable, cobalt-free, combination drier. It contains a balanced metal combination which is necessary for an optimum oxidative drying. It may be added as... view more

ADDITOL® XW 6567 by allnex is a modified hydrocarbon-based defoamer for waterborne epoxy & phenolic systems used in B&B, DWI, general line containers, caps, closures and aerosol industry. It is... view more

ADDITOL® XW 6581 by allnex is a wetting agent and ionic & non-ionic surfactant with pigment affinity groups. It is free of nonylphenolethoxylates and VOC. It improves wetting of organic and... view more

ADDITOL® XW 6584 by allnex is silicone-based defoamer. It is easy to incorporate with good compatibility in all water-borne paint systems and clear coats. It is applicable for styrene-acrylate, PU... view more

ADDITOL® XW 6585 by allnex is an easy to incorporate, anti foam/air release modified silicone-based defoamer. It is VOC-free (EU 2004/42/EG), mineral-, emulsifier & APEO-free with no influence on... view more

ADDITOL® dry CF100 by allnex is a ready to use, universal cobalt-free primary drier designed to have excellent compatibility and fast incorporation in all solvent- and water-based alkyd paints. It is... view more

ADDITOL® dry CF103 by allnex is cobalt- & solvent-free, primary drier based on accelerated manganese. It possesses low VOC, reduced odor and high flash point. It is a ready to use product with... view more

ADDITOL® dry CF200 by allnex contains a balanced auxiliary drier metal combination. It is recommended to be used together with cobalt-free primary driers ADDITOL® dry CF 100 or ADDITOL® dry CF 101... view more

ADDITOL® dry CF300 by allnex is a cobalt- & APEO-free, auxiliary drier metal combination. It optimizes oxidative drying. It offers good pigment wetting, block- & water resistance and improved... view more

CYMEL® 1156 resin by allnex is a highly butylated melamine resin-crosslinker. It is developed for use in water-borne, solvent-borne and organo-soluble systems. It is very hydrophobic in nature... view more

CYMEL® 1168 resin by allnex is a highly monomeric, methylated/isobutylated melamine-formaldehyde cross-linking agent. It possesses high degree of alkylation, a low methylol content and low imino... view more

CYMEL® 1170 resin by allnex is a highly butylated glycoluril, crosslinker. It is designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing... view more

CYMEL® 350 resin by allnex is a highly methylated, monomeric melamine resin recommended for use in both water-borne and solvent-borne systems. It is a very efficient cross-linking agent and is... view more

CYMEL® 370 resin by allnex is a partially methylated melamine crosslinker supplied in iso-butanol. It shows very good compatibility with acrylic-, alkyd-, epoxy- and polyester- resins. Like other... view more

CYMEL® 3745 by allnex is a highly methylated melamine crosslinker. It is designed for use in both solvent-borne and water-borne industrial finishes. It offers excellent deformation & film... view more

CYMEL® 380 by allnex is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, it is fast reacting and has a high tendency to self-condense resulting in... view more

CYMEL® NF 3030 resin by allnex is a formaldehyde-free, cross-linking agent supplied in water. It has a high Tg and should be paired with softer polyols (Tg <30°C) to avoid film checking or cracking... view more