Polyamide powders. Used in coil-coating, hardwood flooring, kitchen cabinet, furniture, toys, automotive, aerospace, general industrial and TV/Stereo appliances, inks or OPV (over print varnishes)... view more

QA 145 by Arkema is acrylic copolymer for the formulation of water-based traffic paint. It is used in architectural and decorative market... view more

QE 242 by Arkema is a semi-flexible, glossy and clear film, styrenated acrylic copolymer resin. It is used as a primer in water-based coil coating and anti-corrosive... view more

Rilsan® D30 NATURAL is a high performance, low density polyamide 11 (PA 11) grade by Arkema. It is a surface modifier and exhibits good dispersion capacity. Suitable for 100% solid UV curable... view more

Rilsan® D40 NATURAL is a high performance, low density polyamide 11 (PA 11) grade by Arkema. Recommended for coil-, wood- and plastic coatings. Exhibits good dispersion capacity, good impact... view more

Rilsan® D50 NATURAL by Arkema is a high performance polyamide 11 (PA 11) grade. Designed for coil-, wood- and plastic coatings. Exhibits low density and good dispersion capacity. Suitable for 100%... view more

Rilsan® D60 NATURAL by Arkema is a high performance polyamide 11 (PA 11) grade. Exhibits low density and good dispersion capacity. Recommended for 100% solid UV curable systems, water- and solvent... view more

Rilsan® D80 NATURAL is a low density, high performance polyamide 11 (PA 11) grade by Arkema. Suitable for 100% solid UV curable systems, water- and solvent based coatings. Exhibits good dispersion... view more

SYNAQUA® 2350 EP 60 is a highly flexible carboxylated epoxy-acrylic copolymer by Arkema. Used for dip and curtain coating. Offers fast drying, good gloss and very good pigment wetting. SYNAQUA® 2350... view more

SYNAQUA® 4804 by Arkema is a waterborne, low VOC capable, short oil alkyd emulsion. It is an APEO- & ammonia-free binder developed for a wide variety of coatings where performance similar to... view more

SYNAQUA® 6812 by Arkema is a self-emusifiable alkyd used as a grinding medium. It is also a co-binder for wall primers with improved adhesion on porous substrates (gypsum, plasterboards). SYNAQUA®... view more

Synolac® 811 S 48 is a water-borne acrylic type alkyd emulsion. It contains alcohol/water as the volatile component. Helps in eliminating cissing and other defects. Suitable for water soluble one... view more

SYNAQUA® 9511 by Arkema is an acrylic polyol emulsion which serves as a binder. When used in 2K or 1K stoving systems, this waterborne binder provides a better balance of performance characteristics... view more

40% active dispersion of polyethylene wax in isopropanol. Acts as a scratch/mar resistant. Provides very good storage stability. Enhances slip. Imparts very good scuff, rub and heat resistance... view more

40 % active dispersion of polyethylene wax in butyl acetate. Acts as a scratch/mar resistant. Provides exceptional rub, abrasion resistance. Offers exceptional slip, solvent and heat resistance... view more

ENCOR® 300 latex by Arkema is a vinyl acrylic polymer. It is a general-purpose binder that offers outstanding film formation and application properties without the need for coalescing solvents or... view more

Encor® 320 latex by Arkema is a vinyl-acrylic latex. It sets the highest performance standard for vinyl acrylic binders in low VOC architectural coatings and can be formulated without coalescing... view more

ENCOR® 441 by Arkema is an acrylic latex. Properly formulated coatings offer a balance of cohesion and adhesion to protect the surface and remain easily strippable. It can be used to formulate... view more

ENCOR® 455 latex by Arkema is a styrene-acrylic latex designed for use in primers and topcoats... view more

Encor® 625 by Arkema is a 100% acrylic latex. Is suitable for waterborne coating systems. Is recommended for use in exterior house paints. This product is no longer available and has been replaced... view more