Calcigloss IP by Omya is mineral filler which stabilizes gloss and haze at lower pigment levels. It is designed to enhance the performance of pigments in a wide range of gloss levels. It offers... view more

Omyacoat 420-IP by Omya is ultra-fine ground calcium carbonate-based mineral filler. It allows optimization of titanium dioxide content based on the opacifying effect. It offers very good... view more

Sasolwax A28 is a Fischer-Tropsch chemically modified wax, available as white powder. It has straight chain of hydrocarbons, a high melting point, a low viscosity, an excellent hardness and is... view more

Halar® ECTFE 6014 by Syensqo Ethylene chlorotrifluoroethylene fluropolymer. Used for electrostatic powder coatings and is particularly recommended for use as a topcoat in protection and anti-corrosion... view more

Halar® ECTFE 6014F by Syensqo Ethylene chlorotrifluoroethylene fluropolymer. Used for electrostatic powder coatings and is particularly recommended for use as a topcoat in protection and anti-corrosion... view more

Halar® ECTFE 6514 by Syensqo is Ethylene chlorotrifluoroethylene fluropolymer. Used for electrostatic powder coatings and is particularly recommended for use as a primer in protection and anti-corrosion... view more

Halar® ECTFE 6914 by Syensqo Ethylene chlorotrifluoroethylene fluropolymer. Used for powder coatings and is particularly recommended for use as a primer on aluminum large surface area parts in protection... view more

KetaSpire® KT-820SFP by Syensqo is a low flow grade of unreinforced polyetheretherketone. It is supplied in a natural colored, super-fine powder form. It is flame resistant and exhibits high thermal... view more

Benzoin by Tech-power (Huangshan) is a surface accelerator recommended for powder coatings. It helps in overcoming the defects of pinholes caused by powder coating raw material. Recommended dosage... view more

TP3208 by Tech-power (Huangshan) is a non-reactive, wax-free matting agent. It provides excellent flow, anti-yellowing, and mechanical properties. It offers stable gloss which is insensitive to... view more

TP550 by Tech-power (Huangshan) is an acrylic resin with epoxy groups which acts as a pure polyester matting agent. It is also used as a curing agent for low-acid-valence (25-30) saturated carboxyl... view more

TP68 by Tech-power (Huangshan) acts as a matt hardener. It is compound salt of cyclic-amidine and multi-acid. It offers excellent mechanical quality and a wonderful appearance. It provides gloss... view more

TP988 by Tech-power (Huangshan) is a flowing agent. It provides superior flow leveling and dispersing properties. It can be applicable to any powder coating systems including EP.PES/EP, hybrid... view more

EPIKURE™ Curing Agent P-101 by Westlake Epoxy is an ultra-rapid, curing agent. It is especially designed to cure epoxy resin powder coatings at temperatures down to 121°C. It is a versatile... view more

EPIKURE™ Curing Agent P-108 by Westlake Epoxy is a catalytic type, curing agent. It is an accelerated form of dicyandiamide. It is used in powder coatings and to prepare thin film decorative... view more