CAB-O-SIL® TS-710 by Cabot is a polydimethylsiloxane (PDMS) modified, low surface area fumed silica. Acts as a thickener. Compatible with epoxy, polyurethane and vinyl ester resins. Provides easy... view more

Bengel® 958 by Elementis is an easy dispersible rheological additive for low to medium polarity binders and solvents. It is cost-effective organic derivative of a bentonite clay. It is easy to... view more

Bentone® SD-3 by Elementis is an organic derivative of hectorite (smectite) clay-based highly efficient rheological additive. It is designed for use in coating systems with a wide range of solvent... view more

THIXATROL® GST by Elementis is non-yellowing, organically modified derivative of castor oil-based rheological additive with inorganic flow control agent. It is suitable for aliphatic and aromatic... view more

Thixcin® R by Elementis is a non-hygroscopic rheology modifier for organic systems based on non-polar solvents and for powder coatings. It adds thixotropic body and controls viscosity. It controls... view more

BLUESIL™ PI 2074 by Elkem Silicones is a (tolylcumyl) iodonium tetrakis (pentafluorophenyl) borate. Acts as a cationic photoinitiator. It is compatible with epoxy resins, vinyl ethers or any other... view more

ANCAMINE® 2337S by Evonik is modified aliphatic amine. Acts as a latent curing agent for epoxy resins. Provides good adhesion and easy dispersion in liquid resins. Offers very good shelf stability in... view more

ANCAMINE® 2442 by Evonik is modified polyamine. Acts as a latent curing agent for one-component epoxy formulations. Provides a good balance of low temperature activation, good shelf stability and... view more

Versalink® 740M by Evonik acts as a polyurethane additive and is a high-performance curative for use in mixed isomer liquid polyurethane prepolymers. It is an effective curative for epoxy resins... view more

Lanco™ Flow P 30 by Lubrizol is a modified castor oil wax. Used for powder coatings. Improves flow and levelling. Supports degassing. Offers minimal influence on gloss and wide compatibility... view more

Modified polyethylene wax. Improves scratch and metal mark resistance. Possesses homogeneous particle size distribution. Reduces coefficient of friction. Offers gloss control for a matte or satin... view more

Micronized polypropylene-modified polyethylene wax. Enhances scratch resistance. Provides very good antiblocking properties. Improves metal mark resistance. Increases resistance to scuffing. Offers... view more

Micronized polypropylene-modified polyethylene wax. Halogen-free readily dispersible, tough wax with a high melting point. Provides very good abrasion resistance and very good resistance to... view more

Micronized, PTFE-modified polyethylene wax. Offers very good surface smoothness through the combination of pure PTFE and hard polyethylene wax. Provides high scratch resistance and good metal... view more

Sicomin® Red L 2922 by Sun Chemical (DIC) is a lead chromate molybdate sulfate pigment. It possesses medium fastness properties but high chroma. It consists of mixed crystals consisting of lead... view more