Nalzin® FA 179 by Elementis is a corrosion inhibitor for aqueous paint systems to counteract the formation of flash-rust. It is also suitable for application as an inhibitor against the formation of... view more

RHEOLATE® 2000 by Elementis is a highly efficient, VOC-free, pourable liquid anti-settling rheology modifier for water-borne systems including water-reducible alkyd, acrylic, epoxy and urethane resin... view more

RHEOLATE® 2001 by Elementis is a fine particle size high efficiency pourable liquid anti-settling agent for use in water-reducible coating and ink systems. It is used in systems having pH higher than... view more

RHEOLATE® 210 by Elementis is a low odor, VOC-free, polyether urea polyurethane solution in a mixture of water and wetting agent. Acts as an associative thickener for emulsion paints and water-borne... view more

RHEOLATE® 212 by Elementis is a VOC-free polyether polyurethane. Acts as an associative flow modifier and thickener for aqueous applications. It can be used alone or in combination with a co-thickener... view more

BLUESIL™ BP 9800 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, BLUESIL™ BP 9800 enables the formulation of... view more

BLUESIL™ BP 9821 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, it enables the formulation of coatings with high... view more

AIRASE® 8070 Deaerator by Evonik is an effective deaerator concentrate based on polyether siloxane technology. It contains no VOCs, APEs (alkylphenol ethoxylates) and HAPs. It eliminates foam, pinholing... view more

Carbowet® 100 by Evonik is non-ionic APEO free, solvent-free surfactant. Acts as a cost-effective pigment/surface wetting agent for water based decorative coatings. Possesses very good compatibility... view more

Carbowet® 13-40 by Evonik is a VOC- and APE- free alternative to 30-40 mole ethoxylate surfactants. It is a cost-effective, low-odor and low-viscosity liquid. It provides substrate wetting, pigment... view more

Surfynol® DF-70 by Evonik is an organic-based defoamer designed specifically for water-based formulations. It is used in coatings, flexographic flexible packaging and gravure publication ink... view more

SURFYNOL® DF-75 by Evonik is a mineral oil-free, non-silicone defoamer. It provides knockdown and sustained defoaming in a wide variety of water-based formulations. It is designed for pigment... view more

Omnirad 1173 (Former Irgacure 1173) by IGM Resins is a versatile highly efficient, slight odor, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers... view more

Omnirad 2022 (Former Irgacure 2022) by IGM Resins is a highly efficient liquid curing agent that is used to initiate radical polymerization of unsaturated resins after exposure to UV light. It acts as... view more

Omnirad 500 by IGM Resins is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation.It is... view more