100% active, liquid, defoaming agent. Provides efficient foam and froth control in the manufacture of paints. Approved by FDA. Used for waterborne architectural coatings based on PVA, acrylic and... view more

Foamaster® H 2 by BASF is a mixture of low aromatic mineral oil, hydrophobic silica (siliconized) and fatty acid derivatives. Acts as a highly effective defoamer for use in most water-based paint... view more

Foamaster® NDW by BASF is an effective defoamer for paints based on synthetic latex. Suitable for styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. It gives good brushability... view more

Foamaster® NXZ by BASF is a formulation based on hydrocarbons and non ionic surfactants. Acts as a liquid defoamer for emulsion paints based on styrene-butadiene, acrylic, polyvinyl chloride and its... view more

100% active defoaming agent. Used for aqueous printing inks and waterborne architectural coatings based on acrylic, PVA and vinyl/acrylic. Provides effective long term defoaming without sacrificing... view more

Water-free 100 % active defoamer. Used to provide efficient and economical defoaming in water based coatings based on acrylic, PVA and vinyl/acrylic. Offers broad spectrum, rapid bubble break, very... view more

100% active defoamer. Designed to provide efficient foam and froth control in manufacture of synthetic latex and subsequently compounded paints based on SBR, PVA, acrylic and vinyl acrylic... view more

Sodium polyacrylate. Used as a non-foaming, highly efficient dispersing agent for pigments in aqueous systems. Produces a fine dispersion of pigments in emulsion paints. Allows high pigmentation... view more

Hydropalat® 680 by BASF is dihexyl sulphosuccinate, sodium salt. It acts as a highly efficient wetting agent for use in aqueous coatings and printing inks. It offers improved shear and electrolyte... view more

Ethyldiglycol acrylate. Acts as a thinner and crosslinker in radiation-curable coatings... view more

Laropal® A-8L by BASF is a condensation product from urea & aliphatic aldehydes, 80% solution in 1-methoxy 2-propylacetate (MPA). It shows good pigment & substrate wetting, low solution viscosity... view more

Loxanol® 842 DP 9 by BASF is very effective and pumpable additive which is based on a straight chain fatty alcohol. It prolongs the open time. It is used to prolong the open time of latex decorative... view more

Nopcocide® N-40-D by BASF is an aqueous emulsion of tetrachlorisophthalonitrile. It is used as a fungicide with a broad application spectrum in the prevention of mold formation on coating films. It is... view more

Perenol® F 41 by BASF acts as a silicone and solvent-free levelling agent. It eliminates or reduces peel. It used for applications like nitrocellulose lacquers, chlorinated rubber coatings... view more

Rheovis® PU 1250 (Old Name: DSX® 1550) by BASF is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It is hydrophobic-modified polyurethane associative thickener. It is... view more

Tinuvin® 292 by BASF is a liquid hindered amine light stabilizer especially developed for coatings. It provides a significantly extended lifetime to coatings by minimizing paint defects such as... view more

Tinuvin® 292 HP by BASF is a liquid hindered amine light stabilizer for water-based and solvent-based coatings. Used in automotive coatings (non acid catalyzed), especially refinish coatings and... view more

Tinuvin® 5050 by BASF is liquid blend of 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS). Used for a wide range of coatings for wood, plastics... view more

Tinuvin® 5060 by BASF is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high... view more

Tinuvin® 5151 by BASF is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high... view more