Encor® 2711 is an APEO-free, water-borne acrylic emulsion by Arkema. Exhibits sandability and stain blocking resistance. Encor® 2711 is suitable for primers for wood coatings... view more

Encor® 2716 is an APEO-free, tack-free, water-borne and UV-curable acrylic emulsion. Exhibits good grain resistance. Suitable for clear & pigmented sealers and topcoats. Applications include open... view more

Encor® 2763 is a multipurpose, APEO-free, water-borne acrylic emulsion. Suitable for one component (1K) coatings, cyanate (NCO) containing two component (2K) coatings and clear & pigmented sealers... view more

Kynar Aquatec® ARC by Arkema is 70% by weight Kynar® PVDF resin and 30% proprietary acrylic resin. Provides tremendous resistance to dirt pick-up, outstanding water repellency, high initial and... view more

Kynar Aquatec® CRX is polyvinyl fluoride by Arkema. Kynar Aquatec® CRX-based coatings offers increased hardness as well as chemical resistance needed to meet the requirements of AAMA 615 and AMMA... view more

Kynar Aquatec® FMA-12 by Arkema is polyvinyl fluoride with a mild/ neutral odor. Exhibits premium durability and performance without the need for either a high temperature bake or the addition of... view more

Modified acrylic polymer. Provides outstanding water- and blush resistance and helps in excellent penetration into substrate. Exhibits good alkali resistance over new concrete, excellent chemical... view more

Acrylic, vinyl acetate and vinyl versatate terpolymer. Exhibits excellent water-, alkali-, scrub-, mud-crack- and UV resistance. Provides outstanding hydrolytic stability, binding efficiency... view more

Acrylic, vinyl acetate and vinyl versatate terpolymer. Exhibits excellent water-, alkali-, grain-cracking- and UV resistance. Provides outstanding exterior durability, excellent film integrity over... view more

SNAP® 2147 BY Arkema is a self-crosslinking, APEO-free, water-borne acrylic emulsion. Used in combination with UV-curable acrylic emulsions. Suitable for clear & pigmented sealers and topcoats... view more

Synolac® 3510 SW 80 is a water-borne modified OFPE type alkyd emulsion. It contains propylene glycol dimethyl ether (PGDME) as the volatile component. Exhibits good chemical- & corrosion resistance... view more

SYNAQUA® 4804 by Arkema is a waterborne, low VOC capable, short oil alkyd emulsion. It is an APEO- & ammonia-free binder developed for a wide variety of coatings where performance similar to... view more

Synolac® 811 S 48 is a water-borne acrylic type alkyd emulsion. It contains alcohol/water as the volatile component. Helps in eliminating cissing and other defects. Suitable for water soluble one... view more

Short oil alkyd emulsion. Used in interior and exterior architectural enamels, high gloss sash and trim enamels and industrial enamels. Offers high gloss potential and low yellowing. Possesses quick... view more