Joncryl® 683 by BASF is a low acid value acrylic resin. It imparts resolubility and gloss in alkaline resistant inks. Joncryl® 683 is recommended for use in overprint varnishes... view more

Cost-effective, mid-range molecular weight styrene acrylic resin. It is available in form of clear flakes. Used in overprint varnishes... view more

Joncryl® ECO 675 by BASF is a glycol ether-free, low VOC, mid-range molecular weight styrene acrylic resin. Enhances gloss, holdout and re-solubility. Joncryl® ECO 675 is used in low odor inks and... view more

Glycol ether-free, low molecular weight styrene acrylic resin. It is available in form of clear flakes. It enhances gloss and holdout. Used in high solids overprint varnishes... view more

Hydrogenated vegetable oil glyceride. Has a hard glossy smooth surface and a bland odor. Acts as a substitute for paraffin in wax applications. Used in paper cup coatings, ink ribbons and textile... view more

Benzophenone by Cheermove is a highly effective Type II photoinitiator. It is suitable for UV-cured inks and coatings. It is used in overprint varnish, plastic & wood coatings, lithographic inks... view more

Licocare® RBW 106 Flakes TP by Clariant is a polar-modified, natural wax based on renewable resource. Acts as a scratch- & slip resistance agent and matting agent. Exhibits good rub resistance... view more

Licowax® OP flakes by Clariant is a partly saponified ester wax of montanic acids. Exhibits excellent wetting & dispersion of inorganic filler in PO compounds, excellent paste forming properties... view more

SMA® 17352 by Cray Valley (Total Group) is a partial mono ester of styrene-maleic anhydride and a blend of two alcohols. It is a moderate solution solid in an aqueous base. It exhibits very high... view more

Carnauba wax. Acts as a matting agent. Has low drop point and good hardness. Used for porous, flexible, soft surfaces as well as for hydrophilic systems / pigments. Also used for high quality paints... view more

Nonpolar polyethylenewax. Used as dispersing agent for masterbatch, lubricant for plastics, modification of adhesive and coating hotmelt, additive for hydrogen carbon waxes... view more

Chlorez® 700-DF by Dover Chemical (ICC Industries) is a non toxic chlorinated paraffin resin. It is used as a highly effective, environmentally friendly flame retardant in inks and coatings. Provides superior thermal... view more

Neopolymer 160 by ENEOS is acid modified, C9-based non-hydrogenated aromatic neopolymer. It is recommended for gravure and offset inks. It shows high dye dispersibility, print gloss & excellent... view more

Benzophenone. Acts as a type-II photoinitiator. In the presence of oxygen, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers but insoluble... view more

4-Methyl benzophenone. Acts as a type-II photoinitiator. In the presence of oxygen, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers but... view more

E-Sperse® 350 by Ethox Chemicals is a non-ionic, aqueous pigment dispersion and emulsifier. It improves carbon black dispersion for the production of water-based packaging inks. It also improves... view more

E-Sperse® 355 by Ethox Chemicals is a polymeric dispersant. Used in industrial coatings, trade sales paints and printing inks. Provides colloidal (shock) stability. E-Sperse® 355 exhibits heat stability to... view more

Maleic modified glycerol ester of rosin. Used in low VOC lacquer formulations, film forming resin,packaging-gravure inks, wood furniture sealer and sander coats... view more

Maleic modified glycerol ester of rosin. Used in low VOC lacquer formulations, film forming resin,packaging-gravure inks, lacquers wood furniture sealer and sander coats... view more

Maleic modified glycerol ester of rosin. Used in polyester paints, lacquers, PU paints and road marking paints, gravure inks... view more