EBECRYL® LEO 10601 by allnex is a LEO diluting, modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It is produced following good manufacturing practices... view more

EBECRYL® P104 by allnex is an acrylated amine used as a hydrogen donor, or photoactivator. When used in formulations in combination with a photosensitizer (e.g. benzophenone), it provides rapid UV... view more

EBECRYL® P115 by allnex is a copolymerizable amine-based hydrogen donor, or photoactivator in ultraviolet light (UV) curable coatings and inks. It can be used with EBECRYL® P39 (a polymeric... view more

EBECRYL® P116 by allnex is a copolymerizable reactive amine used as a hydrogen donor, or photoactivator in ultraviolet light (UV) curable coatings and inks. It exhibits light color, low viscosity... view more

OTA-480 by allnex is a low viscosity reactive diluent based on a trifunctional oligoacrylate. It exhibits light color, low irritancy and good flexibility. Its high functionality contributes to... view more

EBECRYL® 160 BC by is a reactive diluent. It is a trifunctional diluting oligomer that polymerizes when exposed to sources of free radicals. It possesses low viscosity, low irritancy, light... view more

OTA 480 BC by is a low viscosity reactive diluent based on a trifunctional oligoacrylate. It exhibits light color, low irritancy and good flexibility. Its high functionality contributes to... view more

TMPTA BC by is a low viscosity, light color reactive diluent. It is a trifunctional monomer that polymerizes when exposed to sources of free radicals. It is cost-effective and compatible... view more

LoVOCoat™ Sol 500 by Croda is a polymeric non-ionic surfactant water-in-oil emulsifier designed for the incorporation of a fraction of water into solvent-borne coatings for VOC. It offers cost... view more

DAPRO® DF 682 by Elementis is a silicone fluid grade. Acts as a defoamer. It is a non-explosive, opaque off-white liquid with a mild odor. Available in Americas. Suitable for UV inks, overprining... view more

Esacure KIP 100 F by IGM Resins acts as a photoinitiator. It is a mixture of Esacure KIP 150 (70%) and Omnirad 1173 (30%) and particularly recommended for high reactivity, low odor and color stability. It... view more

Esacure KIP 150 by IGM Resins is an oligomeric polyfunctional alpha-hydroxyketone. It acts as a photoinitiator. It exhibits high reactivity and non-yellowing properties.It is suitable for through and... view more

Esacure TZM by IGM Resins acts as a photoinitiator. It is a mixture of benzophenone and 4-methylbenzophenone. It is highly soluble and compatible with the various curable systems. It is particularly... view more

Omnicat 250 by IGM Resins is a versatile photoinitiator for cationic polymerization of epoxy- or oxetane-based photocurable systems upon light exposure. It is suitable for surface and through cure.It... view more

Omnicat 432 by IGM Resins acts as a photoinitiator. It is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether... view more