EBECRYL® LEO 10551 by allnex is a low viscosity amine modified polyether acrylate oligomer. It provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use... view more

EBECRYL® LEO 10552 by allnex is amine modified, low viscosity polyether acrylate. Provides low extractables, low odor and low migration after UV or electron beam (EB) curing. It is produced... view more

EBECRYL® LEO 10553 by allnex is a polymeric, amine modified, low viscosity polyether acrylate. Offers good cure response, good flexibility, good solvent resistance and high gloss. Provides low... view more

EBECRYL® LEO 10601 by allnex is a LEO diluting, modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It is produced following good manufacturing practices... view more

EBECRYL® P104 by allnex is an acrylated amine used as a hydrogen donor, or photoactivator. When used in formulations in combination with a photosensitizer (e.g. benzophenone), it provides rapid UV... view more

LoVOCoat™ Sol 500 by Croda is a polymeric non-ionic surfactant water-in-oil emulsifier designed for the incorporation of a fraction of water into solvent-borne coatings for VOC. It offers cost... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

Compound based on polydimethyl siloxane oil and silica. Acts as a defoamer. It has the characteristic of being easy to disperse in most foaming mediums. Silcolapse® 416 is self-dispersing; prior... view more

Silcolease® UV Poly 118 by Elkem Silicones is a 100% reactive, low release, UV/EB curable, monocomponent acrylate-functional silicone polymer. It consists of an optimized “low release” pre-blend of... view more

Silcolease® UV Poly 120 by Elkem Silicones is a 100% reactive, low release, UV/EB curable, monocomponent acrylate-functional silicone polymer. It consists of an optimized “low release” pre-blend of... view more

GABEPRO™ GPE-228 by Huntsman is a cycloaliphatic epoxide resin. It exhibits a low viscosity and good fluidity. Shows miscibility with a wide range of organic solvents, including acetone, ethanol and... view more

Esacure KIP 100 F by IGM Resins acts as a photoinitiator. It is a mixture of Esacure KIP 150 (70%) and Omnirad 1173 (30%) and particularly recommended for high reactivity, low odor and color stability. It... view more

Esacure KIP 150 by IGM Resins is an oligomeric polyfunctional alpha-hydroxyketone. It acts as a photoinitiator. It exhibits high reactivity and non-yellowing properties.It is suitable for through and... view more