EBECRYL® LEO 10552 by allnex is amine modified, low viscosity polyether acrylate. Provides low extractables, low odor and low migration after UV or electron beam (EB) curing. It is produced... view more

EBECRYL® LEO 10553 by allnex is a polymeric, amine modified, low viscosity polyether acrylate. Offers good cure response, good flexibility, good solvent resistance and high gloss. Provides low... view more

EBECRYL® LEO 10601 by allnex is a LEO diluting, modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It is produced following good manufacturing practices... view more

EBECRYL® P104 by allnex is an acrylated amine used as a hydrogen donor, or photoactivator. When used in formulations in combination with a photosensitizer (e.g. benzophenone), it provides rapid UV... view more

EBECRYL® P115 by allnex is a copolymerizable amine-based hydrogen donor, or photoactivator in ultraviolet light (UV) curable coatings and inks. It can be used with EBECRYL® P39 (a polymeric... view more

Silcolease® UV Poly 118 by Elkem Silicones is a 100% reactive, low release, UV/EB curable, monocomponent acrylate-functional silicone polymer. It consists of an optimized “low release” pre-blend of... view more

Silcolease® UV Poly 120 by Elkem Silicones is a 100% reactive, low release, UV/EB curable, monocomponent acrylate-functional silicone polymer. It consists of an optimized “low release” pre-blend of... view more

Esacure TZM by IGM Resins acts as a photoinitiator. It is a mixture of benzophenone and 4-methylbenzophenone. It is highly soluble and compatible with the various curable systems. It is particularly... view more

Esacure TZT by IGM Resins acts as a photoinitiator. It is particularly indicated for the photo polymerization of UV curable systems when high reactivity, low curing odor and low yellowing are... view more

Omnicat 250 by IGM Resins is a versatile photoinitiator for cationic polymerization of epoxy- or oxetane-based photocurable systems upon light exposure. It is suitable for surface and through cure.It... view more

Omnicat 432 by IGM Resins acts as a photoinitiator. It is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether... view more

Omnipol TP by IGM Resins is a highly efficient polymeric Type I photoinitiator, based on TPO-L. It is characterized by high reactivity and low odor.Its high molecular weight and low migration... view more