OK
The Universal Selection Source:
Coatings Ingredients
Product News

Aremco Unveils High Temperature Oxidation Resistant Coating, Graphi-Coat™ 623

Published on 2011-12-14. Author : SpecialChem

Graphi-Coat™ 623

Graphi-Coat™ 623, a new high temperature oxidation resistant coating developed by Aremco Products, Inc., is now used to protect graphite crucibles and fixtures used in metallurgical casting processes from the foundry to the jewelry industries to 2000 °F (1093 °C).

Graphi-Coat™ 623 is a patented titanium diboride based coating that significantly inhibits the oxidation of most commercial grades of graphite to 2000 °F (1093 °C). This two-part system is a water-based, non-volatile material that is applied easily using a brush, roller, dip- or spray-processing.

Graphi-Coat™ is formulated with a weight and volume solids content of 78% and 58%, respectively. The coverage rate at a theoretical dry film thickness of 1 mil is 890 ft2/gal. A minimum dry film thickness of 2.5 mils is recommended. Once applied, Graphi-Coat™ is typically air set for 1-2 hours at ambient temperature then cured in-situ or in 10-15 minutes at 1300 °F.

In addition to coating graphite crucibles and fixtures for metallurgical processing, Graphi-Coat™ 623 can be used to protect graphite electrodes used in arc-melting furnaces.

About Aremco

Formed in 1965, Aremco's advanced materials division has been a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200°F. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments, as well as the maintenance and repair of high temperature process equipment.

Source: Aremco


ENG's TECHSCOUT 2018: Strategic Venturing & Innovation Excellence
Back to Top