Industry News

Wacker at ECS 2013: to Showcase its SILRES® BS 1303 Silicone Resin Emulsion for Coatings

Published on 2012-11-07. Author : SpecialChem

At the European Coatings Show (ECS) in Nuremberg from March 19 to 21, 2013, the Munich-based WACKER Group is presenting, among other highlights, the novel SILRES® BS 1303 silicone resin emulsion. This new building protection product is suitable for formulating coatings with moderately hydrophobic surfaces. In silicone resin plasters, SILRES® BS 1303 also prevents pinholing of the plaster. Another première is the new VINNAPAS® LL 3019 dispersion for high-quality outdoor and indoor paint and plaster applications. The versatile binder offers excellent pigment compatibility, extremely good color stability, improved rheology and excellent processing characteristics. WACKER further presents its cyclodextrin technology - for example, as a process auxiliary in polymerization, for selective modification of thermal stability or as a rheology-control additive. The biodegradable molecules produced from renewable raw materials thus offer a sustainable and environmentally friendly alternative for many applications in the paints and coatings industry.

The new silicone resin emulsion SILRES® BS 1303 is suitable for formulating coatings with moderately hydrophobic surfaces. The new building protection product further prevents pinholing of the plaster.

At ECS 2013, WACKER presents a new building protection product for façade paints and plasters that can be used as both a binder and an additive. In coatings applications, SILRES® BS 1303 realizes the typical effects of a silicone resin, such as low water absorption and high water-vapor permeability. But, unlike comparable products, it does not show pronounced surface hydrophobicity. For manufacturers of façade coatings, this opens up entirely new formulation options for adjusting the surface characteristics of the SREP® coatings (silicone resin emulsion paints / plasters).

The new building protection product permits coatings to be formulated with moderately hydrophobic surfaces. SILRES® BS 1303 is also ideally suited for formulating silicone resin plasters. The product offers excellent compatibility with such systems and can also prevent pinholing on the plaster.

The new SILRES® BS 1303 is therefore ideal for façade applications where high quality standards are essential, and thus extends the broad WACKER portfolio for silicone resin paints and plasters, which now covers the entire bandwidth from strongly to moderately hydrophobic surfaces for plasters and façade coatings.

New All-round Dispersion for Indoor and Outdoor Paints

The new VINNAPAS® LL 3019 dispersion based on vinyl acetate-ethylene-vinyl ester copolymers is a versatile binder for high-quality paint and plaster applications. With its good pigment compatibility and extremely good color stability, it offers an impressive solution, particularly for exterior paints and renders. Other benefits included improved rheology and excellent processing characteristics. The new product is therefore an ideal binder for a range of applications: From pure dispersion paints, through silicone resin emulsion paints to silicate paints, or alternatively for the topcoat of energy-saving external thermal insulation composite systems (ETICS). VINNAPAS® LL 3019 thus offers an ideal and inexpensive alternative to high-quality styrene-acrylate and acrylate dispersions.

The new dispersion is produced without the use of formaldehyde donors or alkylphenolethoxylates (APEO) and does not require film-forming agents or cosolvents. It thus allows paints to be formulated with a low content of volatile organic compounds (VOC < 1="" g/l)="" and="" is="" therefore="" also="" outstanding="" for="" the="" production="" of="" solvent-free,="" low-emission,="" matt="" interior="" paints="" and="" interior="">

Cyclodextrins as Environmentally Friendly Processing Auxiliaries

Another highlight at ECS 2013 is WACKER's cyclodextrin technology for the paints and coatings industry. Cyclodextrins form a cavity in the center of their ring-shaped structure which can accommodate other, predominantly hydrophobic substances to form "host-guest complexes." This allows them to absorb and transport substances or protect sensitive molecules, stabilize interfaces and selectively improve the properties of polymer systems.

These advantages open up many new applications for cyclodextrins in functional systems - they can be used as process auxiliaries during polymerization, as additives for phase-transfer catalysis or for reaction control in the copolymerization of highly hydrophobic monomers. By complexing the aromatic and aliphatic groups of polymer chains, cyclodextrins can selectively influence polymer systems, for example by modifying their weight or influencing their thermal sensitivity. As performance additives, cyclodextrins improve the water solubility without the need to add organic solvents. And as rheology control additives, they selectively modify the flow properties of paints and coatings, and can be used together with, for example, associative thickeners to improve the viscosity of the end product.

Bioengineered from renewable, plant-based raw materials, cyclodextrins thus offer a sustainable, innovative and environmentally friendly alternative for many applications in the paints and coatings industry.

Visit WACKER at the European Coatings Show 2013 in Hall 1, Booth 1-510.


WACKER is a globally-active chemical company with some 17,200 employees and annual sales of around €4.91 billion (2011). WACKER has a global network of 24 production sites, 19 technical competence centers and 53 sales offices.

Source: WACKER

Sustainnovation is not a buzzword
Channel Alerts

Receive weekly digests on hot topics

Back to Top