OK
The Universal Selection Source:
Coatings Ingredients
Industry News

No-Burn® Intumescent & Fire Retardant Coatings Pass VOC Content & Emission Standards

Published on 2012-05-25. Author : SpecialChem

Intumescent and fire retardant coatings are held to the same VOC content and emission standards as interior, flat latex coatings and paints. Intumescents and fire retardants differ drastically, from a performance standpoint, when compared to interior, flat latex coatings and paints. Passing low VOC content and emission standards is significant because intumescent and fire retardant coatings are installed in both commercial and residential applications to satisfy International Building (IBC) and Residential Code (IRC) requirements. No-Burn®, Inc.'s products have always been cutting-edge, "Satisfying not only building and safety requirements, but they meet low emission standards giving our clients, building occupants and designers the surety that our products perform" stated Bill Kish, President of No-Burn®, Inc.

No-Burn® meets multiple green rating system requirements set forth by the following organizations:

  • LEED
  • Collaborative for High Performance Schools (CHPS) rating system
  • IgCC
  • GSA-P100
  • ICC-700 NGBS
  • ANSI/ASHRAE Standard 189.1
  • ANSI/GBI 01-2010 Green Building Assessment Protocol
  • AQMD standards for flat coatings
  • MPI-GPS 2-L, RG

Complying with the California Department of Public Health Standard, CDPH/EHLB/Standard Method Version 1.1, 2010 also known as Emission Testing Method for CA Specification 01350, means the application of No-Burn® in commercial and residential buildings adds to the building's sustainability, green attributes as well as low emissive and low VOC content material standards. For a full list of green rating systems and No-Burn®'s contributions to Better the Built Environment, visit No-Burn®, Inc.'s website.

No-Burn® low emissive and low VOC content intumescent and fire retardant coatings:

  • Intumescent coating- non-prescriptive ignition barrier,
  • "Class A" flame spread and smoke development ratings for interior finish requirements,
  • Thermal barrier- non-prescriptive SIPs and
  • Meets International Codes' fire performance requirements as alternative materials, design and methods of construction.

About No-Burn®, Inc.

No-Burn®, Inc. has been leading the way in fire resistant technology since 1998. All No-Burn® intumescent and fire retardant coatings are evaluated by independent third party laboratories for compliance with International Building and Residential Codes. No-Burn®'s products are low VOC content and low emissive formulations that are also non-toxic and non-carcinogenic. Several No-Burn® products also offer a dual level of protection, reducing the risk of fire and resisting the growth of toxic-black mold.

About Berkeley Analytical

Berkeley Analytical is an independent, third-party laboratory specializing in the analysis of organic chemicals emitted by and contained in building products, finishes, furniture, and consumer products. They are an ISO/IEC 17025 accredited laboratory (IAS, TL-383).

Source: No-Burn®, Inc.


FEICA 2018 European Adhesive and Sealant Conference and EXPO
Back to Top