TAGS: Epoxy Coatings Sustainability / Natural Coatings
Hexigone’s latest test results prove that their sustainable corrosion inhibitors, Intelli-ion, reaches C5 levels of corrosion protection in both waterborne and solventborne coatings. This presents the global coatings industry with the highest level of corrosion protection that is heavy metal and chromate-free.
C5 for Highly Corrosive Environments
C1-C5 are classifications used to describe the level of corrosion resistance required for aggressive environments & applications. C5 refers to highly corrosive environments, where the steel structure is exposed to high levels of humidity, saltwater spray, and other corrosive substances.
Many coatings manufacturers formulate coatings to provide protection in these conditions, such as offshore oil and gas platforms, coastal areas, and chemical plants.
The coatings that have been tested were formulated at the PRA (Paint Research Association), a UK-based organization that provides technical and scientific support to the global coatings industry. The REACH compliant inhibitors were added to both waterborne (WB) and solvent borne (SB) 2 pak epoxy coatings, with primer only as well as top-coated systems tested.
The panels used for testing were shot-blasted to Sa2.5 as per C5 specification. Each primer layer had an average dry film thickness (DFT) of 120 µm and the topcoat was applied at approx. 60 µm. After 1440 hours salt spray testing (SST) to ASTM B117 both the primer and full system for our WB Epoxy and SB Epoxy displayed zero signs of blistering in the coating system.
To demonstrate the full performance of both systems with AX1 in, we removed half of the paint system to view the substrate underneath. The WB Epoxy system after 1440 hours shows minimum corrosion at the scribe, evidencing Intelli-ion’s excellent performance in WB systems. The SB Epoxy system also meets specifications with no blistering, minimum cross scribe corrosion, and no undercoat corrosion present on the full substrate.
Exceptional Protection to Infrastructure
Dr. Catherine Friar, business development manager at Hexigone Inhibitors, commented, “
Our award-winning technology provides exceptional protection to infrastructure in key sectors as well as helping to address environmental challenges faced by the coatings industry.”
“
Reaching 1440 hours allows existing manufacturers of C5 standards of paint to switch to more sustainable inhibitors or facilitate new C5 REACH compliant product lines through sustainable waterborne or low VOC solvent borne coatings,” continued Dr. Friar.
“
These preliminary results indicate that the coating systems would meet the High Durability requirements of the ISO 12944:2018 C5 Corrosivity Category. Further testing is ongoing,” added Dr. Friar.
Providing Physical Barrier to Corrosion-inducing Substances
Unlike zinc phosphate, which primarily provides anodic protection via precipitation, Intelli-ion offers both anodic and cathodic corrosion protection. The technology is released in a smart way and works by forming a protective nano layer on the metal surface, which provides a physical barrier to corrosion-inducing substances.
Intelli-ion also has unique electrochemical properties that enable it to donate, or accept a proton, moderating under-film pH. The final mode of protection happens once it has donated a proton to OH- ions resulting from the cathodic oxygen reduction reaction, it forms a lone pair bonded layer over the metal surface at the cathode, blocking interfacial electron transfer.
The three modes of electrochemical protection are unique on the market and have received recognition through winning the British Coatings Federation’s ‘Sustainable Innovation, Supplier’ category in 2022.
Source: Hexigone