OK
The Universal Selection Source:
Coatings Ingredients
Industry News

European Researchers Develop Multi-functional Thin Film Coatings for Electronic Devices

Published on 2012-07-30. Author : SpecialChem

EU-funded researchers developed a new class of thin-film coatings with a huge spectrum of mechanical, optical and electrical properties. Tailor-made combinations of properties should make the coatings a winner with the consumer electronics sector.

Thin-film coatings are widely used throughout the medical, automotive and machine tools industries. They provide additional resistance to a number of conditions detrimental to the life and function of components.

Thin-film coatings are also important to the electronics and optics industries. They play a major role in the semiconductor sector and in electrical connections on circuit boards. Optical coatings are applied to everything from household mirrors to photovoltaic (PV) cells.

More recently, decorative thin film coatings in a wide range of colors have made consumer electronics a bit more fun than black, white and silver.

European researchers set out to develop new coatings for decorative and micro-optoelectronics applications via the 'Development of new hard decorative coatings based on transition metal oxynitrides' (Hardecoat) project.

Scientists developed a new range of coatings, transition metal oxynitrides (TM-O-N), combining the strength of nitrides with the colors attainable using oxides. In addition, transition metals have interesting electrochromic properties, or the ability to change their optical properties in response to a small voltage in applications such as 'smart' windows or X-ray mirrors. As metals, they also can act as conductors or semiconductors.

Integrating all these potential characteristics in one class of compounds and exploring the vast spectrum of possible combinations was the goal of the Hardecoat project.

In addition, investigators opted to modify the physical vapor deposition (PVD) method, specifically reactive sputtering, for deposition of the novel coatings. PVD produces much less negative environmental impact than conventional electroplating or chemical vapour deposition methods that use toxic chemicals and produce a large amount of waste.

Four modified reactive sputtering processes were developed for TM-O-N thin-film deposition. Coatings demonstrated a range of colors, optical and electrical properties as well as excellent resistance to corrosion and wear.

Hardecoat coatings, with their rich spectrum of tuneable properties, should make a significant impact on the decorative, opto-electronic and micro-technology sectors. In addition, the cost-effective and environmentally friendly deposition processes should be welcomed by manufacturers and consumers alike.

About the European Commission

The European Commission represents the general interest of the EU and is the driving force in proposing legislation (to Parliament and the Council), administering and implementing EU policies, enforcing EU law (jointly with the Court of Justice) and negotiating in the international arena.

About CORDIS

CORDIS - Community Research and Development Information Service, is an information space devoted to European research and development (R&D) activities and technology transfer. The main aims of CORDIS are :

  • to facilitate participation in European research and take-up activities;
  • to improve exploitation of research results with an emphasis on sectors crucial to Europe's competitiveness;
  • to promote the diffusion of knowledge fostering the technology take-up to enterprises and the societal acceptance of new technology.

Source: CORDIS


Channel Alerts

Receive weekly digests on hot topics

Back to Top