OK
The Universal Selection Source:
Coatings Ingredients
Industry News

Dürr Receives Large Paint Systems Order in USA

Published on 2008-03-17. Author : SpecialChem

Stuttgart -- The Dürr Group has received a major order from the BMW Group for its US plant in Spartanburg, South Carolina, worth more than € 100 million. The production capacity will be increased from 160,000 to 240,000 units by 2012. The required ex-pansion of the paint shop will be realized largely by Dürr.

Dürr has received several small and medium-sized orders for paint systems in the United States in 2007. "This large order from BMW Group now assures us very good capacity utilization in the United States for the long term. It also underscores the confidence placed in Dürr as a capable provider of comprehensive systems and technology expertise," says Ralf Dieter, CEO of Dürr AG. The order will be executed under the leadership of US subsidiary Dürr Systems Inc.

The paint shop, built by Dürr in 1996, is to be expanded so the X3's successor model and the X6 can be produced there in the future in addition to the BMW X5. The paint shop will be expanded by 28,000 square meters or 80%. Dürr is going to build three new areas for this paint shop: 1) a base-coating facility with pretreatment, dip-coating, and drying, where the RoDip rotation dipping process will be used, 2) a primer line and a top coat line with connected finishing and waxing lines for post-treatment and transport sealing, and 3) a sealing line for weld seams and underbody protection. While production is supposed to begin in the first two areas in mid-2009, the sealing line's startup is planned for mid-2010. Capacity is to increase from 27 units per hour now to 46 as a result of expanding the paint shop.

The project in Spartanburg is the BMW Group's third-largest plant remodeling job for Dürr since 2003. Most recently Dürr expanded and modernized the paint shop at the BMW site in Oxford, England, where the MINI model is produced. In 2003, Dürr remodeled the paint shop at the BMW site in Shenyang, China. In all three projects, Dürr's role is to provide not only the equipment, but also the upstream planning of the paint shop layout and processes.

The Dürr Group is a supplier of plant and equipment that commands leading global market positions in its areas of activity. Business with the automotive industry accounts for about 90% of its sales. Dürr also supplies innovative manufacturing and environmental technologies for the aviation, mechanical engineering, chemical and pharmaceutical industries. The Dürr Group operates in the market through two divisions. The Paint and Assembly Systems division supplies production and painting technologies, mainly for automotive body & chassis manufacturing. The equipment and systems supplied by the Measuring and Process Systems division are used, among other things, for engine and transmission production and for final vehicle assembly. Dürr achieved sales of close to € 1.5 billion with approximately 6,000 employees in 2007. Dürr is present in over 46 locations in 21 countries around the world.

Source: Dürr


Halcyon Group 3rd R&D Innovation Summit
Back to Top