How rheology additives
can help you optimize the storage stability
of your system? Basically, they can help you prevent the following recurring issues:
- Settling, sedimentation
Find out about the appropriate solutions offered by Coatex
by reading the following information and accessing the various suggested documents!
Prevent reagglomeration / and settling thanks to Coatex thickeners
After the mineral particles have been dispersed properly and prevented from re-agglomerating, the consistency or the texture of the formulation will need adjusting to prevent the appearance of sedimentation due to the impact of gravity on dense mineral particles. In-can paint viscosity is measured at low stress and therefore at low velocity gradients too.
Some thickeners interact preferentially with the aqueous phase of the formulation by generating high viscosities with low velocity gradient and are used to maintain the dense mineral particles in suspension by preventing them from sinking to the bottom of the container.
Figure 1: Agglomeration and sedimentation issues
imparting a pseudoplastic type rheology are best suited to prevent sedimentation.
To achieve stability of high PVC formulations and textured coatings
Viscoatex™ 730 is the most appropriate thickener
Access and download Viscoatex™ 730 Technical Data Sheet!
To see more about pseudoplastic thickeners, access presentation & recording!
Control Syneresis for enhanced storage stability
Syneresis is one of the common issues that appears during storage.It is mostly described as the floating liquid phase on the top surface of can coating formulations and represents an unaesthetic defect.
The use of hydrophobically associative thickeners
allows retention of the water inside the can by providing then homogeneous waterborne formulations.
Coapur™ XS 71 and Rheotech™ 2000 associative thickener allowsfor excellent syneresis control
Figure 2: Syneresis control thanks to Rheotech™ thickeners
To answer the requirements for storage stability, Rheotech™ product range
is designed to offer new rheological solutions contributing specifically to better syneresis control!
By using Coatex rheology modifiers in architectural and decorative coatings, formulators can obtain high performance coatings without storage issue
Access Case Study
: Rheotech thickener for storage stability