SCHWEGO®

Antioxidant in solvent mixture. Possesses stabilization of viscosity (against air oxidation) and avoidance of skinning. Is recommended in almost all water borne and solvent based coating systems... view more

VOC-free, aqueous solution of silicone polymers. Possesses flow disturbances, like orange peel or ropiness, which frequently also impair the gloss. Eliminates these surface defects in water borne... view more

Etherified melamine-formaldehyde resin in a mixture of solvents. Acts as a surface active additive, which can eliminate levelling problems in solvent containing paint systems. In consequence of the... view more

Mixture of special surface active substances. Acts as a defoaming and deaerating agent. In most cases it also improves leveling and elasticity of the film... view more

Formulation with vegetable oils and hydrocarbons. Acts as a very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex as well as acrylic... view more

Polymer in solvent mixture. Acts as a defoaming agent. Influences the surface tension in solvent based and solvent free systems, thus improves the leveling, prevents cratering, substrate through... view more

Polymers in mineral oil. Reduces the surface tension in solvent based and solvent free paint systems. Improves the levelling, prevents cratering and showing through of the substrate. Used in... view more

Polymer in solvent mixture. Acts as a defoaming agent. Is an interfacially active product, which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the... view more

Polymer in solvent mixture. Acts as a defoaming agent. Is an additive with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before... view more

Surface active polymers in a solvent mixture. Acts as a VOC-free and silicone-free defoamer. Is an interfacially active additive, which influences the surface tension. Hence, the formation of... view more

Combination of hydrocarbons with emulsifying agents. Acts as a silicone free defoamer... view more

Combination of hydrocarbons. Acts as a very effective defoaming agent for emulsion paints. Particularly for those based on styrene/butadiene latex and acrylic copolymers... view more

Block copolymer. Acts as a defoamer and deaerator. Is an interfacially active product that suppresses the formation of air inclusions and destroys the air bubbles before the film dries. Preserves... view more

Modified acrylate. Improves the resistance against scratch, mar and blocking. Also improves the slip, therefore smooth surfaces are formed and hence also film hardness is increased. Increases the... view more

Modified acrylate. Improves the resistance against scratch, mar and blocking. Also improves the slip, therefore smooth surfaces are formed and hence also film hardness is increased. Increases the... view more

Silicone polymer with organic solvents. Improves the scratch, mar and blocking resistance. Also improves the slip, therefore even surface is formed and hence also film hardness increased. The... view more

Silicone polymer with organic solvents. Improves the scratch, mar and blocking resistance. Also improves the slip, therefore smooth surface is formed and hence also film hardness is increased. The... view more

Silicone polymer with organic solvents. Improves the scratch, mar and blocking resistance. Also improves the slip, therefore smooth surface is formed and hence also film hardness is increased. The... view more

VOC-free polyurethane dispersion. Acts as a non-ionic thickening agent. Possesses high gloss retention, excellent processing properties, perfect flow and leveling properties. Has minimum tendency to... view more

VOC-free polyurethane dispersion. Acts as a non-ionic thickening agent. Possesses high gloss retention, good flow and levelling properties. Has minimum tendency to splatter when using roller... view more

VOC-, APEO- and organotin-free polyurethane dispersion. Acts as a non-ionic thickening agent. Possesses high gloss retention, good flow and leveling properties. Has minimum tendency to splatter when... view more

Silicone polymers with organic solvents. Possesses a very high surface activity, which leads to improved wetting of the substrate by aqueous coating materials. Improves the flow and it does not... view more

Polymeric dispersing agent, with great affinity to pigment surfaces. Thus, primary particles are stabilized in an effective way and their milling time is reduced. Pigments, which tend to settle... view more

Polymer in solvent mixture. Acts as a wetting and dispersing agent. It shortens milling time, as pigment agglomerates are ruptured and stabilized effectively. Hence, sedimentation and unmixing of... view more

Polymer in hydrocarbons. Acts as a dispersing and wetting agent. Improves the wetting, shortens dispersion, prevents flocculation and sedimentation of pigments. Increases the depth of color and... view more

Polymer in solvent mixture. Acts as a dispersing and wetting agent. Improves the wetting, shortens the dispersion process, prevents flocculation and sedimentation of pigments. Increases the depth of... view more

Solution of surface active substances. Acts as an emulsifier, which considerably improves the compatibility of universal color pastes in solvent based pastes. Thus, flocculation, floating and... view more

Polyethers, based on castor oil. Acts as a universal wetting and dispersing agent. Is VOC- and silicone-free as well as biodegradable. Possesses shortened dispersion time, intensified color... view more

Ketoxime, phenols and aromates free antioxidant in solvent mixture. Acts as an Anti-skinning agent. It is a yellow clear liquid. It helps in stabilization of viscosity and avoids skinning. It... view more

SCHWEGO® antimec 8019 is an antioxidant in solvent mixture by Schwegmann. It acts as an anti-skinning agent. It is recommended for water-based and solventborne coating systems. It is free of... view more

SCHWEGO® antimec 8021 is an antioxidant in solvent mixture by Schwegmann. It acts as an anti-skinning agent. It is free of butanone oxime and aromates. It is recommended for water-based and... view more

SCHWEGO® corrit 6831 is a glycolic solution of salts by Schwegmann. It acts as a long term corrosion protection agent. It is recommended for water-based coating systems. It offers conversion of... view more

SCHWEGO® flow 6527 is a solution of polyether-modified polysiloxane by Schwegmann. It acts as a levelling agent. It provides reduced surface tension & improved substrate wetting. SCHWEGO® flow 6527... view more

SCHWEGO® flow 6533 is a solution of polyether-modified polysiloxane by Schwegmann. It acts as a levelling agent. SCHWEGO® flow 6533 is recommended for aqueous coatings, printing inks and overprint... view more

Biodegradable, free of PFOS, PFOA, based on C4 technology polymer in solvent mixture. Acts as a wetting agent. It is a light yellow liquid. It possesses extremely high interfacial activity and... view more

PFOS- PFOA-free based on environmental compliant C4, C6 technology ethanol solution of a fluoro-tenside. Acts as a wetting agent. It is a clear, colorless liquid. It possesses extremely high... view more

PFOS- and PFOA-free, based on environmental compliant C4, C6 technology ethanolic solution of a fluoro-tenside. Acts as a wetting agent. It is a clear, colorless liquid. It possesses extremely high... view more

SCHWEGO® foam 6326 by Schwegmann is an emulsion of oils and hydrophobic components. It is a VOC-free defoamer and deaerator for water-based coating systems... view more

SCHWEGO® foam 6331 by Schwegmann is a polymer in solvent. Deaerating additive for solvent borne, water-based and solvent-free coating systems, free of silicone... view more

SCHWEGO® foam 8336 by Schwegmann is a formulation of a polysiloxanadduct and surface active alcohols. Acts as a defoamer. It is VOC-free and biodegradable. Destroys the air bubbles included in the... view more

SCHWEGO® foam 8339 by Schwegmann is a formulation of a polysiloxanadduct and special modified alcohols. It is a VOC-free defoamer for water-based coating systems... view more

SCHWEGO® inhibitor 6817 is a mixture of organic substances by Schwegmann. It acts as a long term corrosion protection agent. It exhibits good adhesion and good penetration into the residual rust... view more

SCHWEGO® inhibitor 6818 is a mixture of organic substances by Schwegmann. It acts as a long term corrosion protection agent. It provides very good solvent stability. It exhibits good adhesion and... view more

SCHWEGO® mar 6506 by Schwegmann is a silicone polymer with organic solvents. Slip and levelling additive for solvent-borne coating systems... view more

Modified acrylate with fluoropolymer. Acts as a slip control and mar resistant agent. It is a clear, colorless liquid. It improves resistance against scratch, mar and blocking. It also improves... view more

SCHWEGO® mar 8311 is a silicone polymer by Schwegmann. It acts a slip-, and anti-scratching agent. It is a volatile organic compound free grade. It offers improved mar & blocking resistance... view more

SCHWEGO® matt 100 is an untreated thermal silica by Schwegmann. It acts as a matting agent. It is recommended for water-based, solvent-based and solvent-free coating formulations. It offers high... view more

SCHWEGO® matt 412 is a wax after-treated precipitated silica by Schwegmann. It acts as a matting agent. It offers excellent surface smoothness and excellent suspension behavior. It does not contain... view more

SCHWEGO® wett 6248 is a neutralized phosphoric ester and polymers in solvent mixture. It acts as a wetting and dispersing agent by Schwegmann. It is recommended for solventborne coatings and resin... view more

SCHWEGO® wett 6249 is a blend of phosphoric ester and polymers in solvent mixture. It acts as a wetting and dispersing agent by Schwegmann. It offers reduced dispersion time, intensification of... view more

VOC-free, biodegradable polymer tenside mixture. Acts as a dispersing and wetting agent. It is a clear to slightly turbid, colorless liquid. It considerably shortens milling time, as pigment... view more

VOC-free, anionic, biodegradable organic phosphoric acid ester. Acts as a dispersing and wetting agent. It is a clear light-yellowish liquid. It reduces dispersion time, settling and floatation. It... view more

VOC-free, biodegradable polymer. Acts as a dispersing and wetting agent. It controls the stability of the coating system. It facilitates the formation of primary particles during the dispersion... view more

Glycolic solution of salts. Acts as a corrosion protecting agent. Used to compensate poor preparation of the substrate and unsatisfactory painting conditions like manual derusting (residues of... view more

Silicone polymers with organic solvents. Is biodegradable. Possesses low disturbances, such as orange peel or streaks are undesirable film defects, which frequently also impair the gloss. Eliminates... view more

Ethanolic solution of a fluoro-tenside based on polyether. Acts as a highly effective substrate wetting agent for solvent based and water borne coating systems. Possesses extremely high interfacial... view more

Ethanolic solution of a fluoro-tenside based on polyether. Acts as a wetting agent for pigment pastes. Is biodegradable. Possesses extremely high interfacial activity. Reduces the surface tension to... view more

Aqueous solution of a fluorosurfactant based on polyether. Acts as a wetting agent for pigment pastes. Possesses very high interfacial activity. It lowers the surface tension extremely and is... view more

Surface active polymers in a solvent mixture. Acts as a polymeric wetting and dispersing agent. Is universally suitable for pigment milling in water borne coating systems. It shortens milling time... view more

Neutralized phosphoric ether and polymers in solvent mixture. Acts as a universal wetting and dispersing agent for solvent based as well as resin free systems. Reduces the dispersion time, flotation... view more

Neutralized phosphoric ether and polymers in solvent mixture. Acts as a universal wetting and dispersing agent for solvent based as well as resin free systems. Reduces the dispersion time, flotation... view more

Solution of surface active substances. Acts as a polymeric wetting and dispersing agent universally suitable for pigment milling in water borne coating systems. It shortens milling time, because... view more

Polymer in solvent mixture. Acts as a wetting and dispersing agent. It shortens milling time, as pigment agglomerates are ruptured and stabilized effectively. Hence, sedimentation and unmixing of... view more

Neutralized phosphoric acid ester in solvent mixture. Acts as a universal wetting and dispersing agent. Possesses reduced dispersion time, intensified color depthness, reduction of settlement as... view more

Polymer in solvent mixture. Acts as a dispersing and wetting agent. Improves the wetting, shortens dispersion, prevents flocculation and sedimentation of pigments. Increases the depth of color and... view more