BLUESIL™

BLUESIL™ ADD 10086 by Elkem Silicones is a polydimethylsiloxane gum in solvent solution. It is especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is... view more

BLUESIL™ ADD 11013 by Elkem Silicones is a polyether-modified polydimethylsiloxane. Acts as a wetting agent, antifoaming agent, mar and scratch resistance agent. Improves their flow and leveling... view more

BLUESIL™ BP 9705 by Elkem Silicones is a non-ionic, APEO free, alkylpolysiloxane aqueous emulsion. Acts as a water repellent additive. Improves the processability and the antiblocking... view more

BLUESIL™ BP 9710 is water-based alkylpolysiloxane oligomer emulsion designed to protect surfaces against moisture. Acts as a water repellent. It is entirely formulated in a water base, it is free of... view more

BLUESIL™ BP 9800 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, BLUESIL™ BP 9800 enables the formulation of... view more

BLUESIL™ BP 9821 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, it enables the formulation of coatings with high... view more

BLUESIL™ BP 9878 by Elkem Silicones is an aqueous polymethylsiloxane resin based emulsion. Provides two fundamental properties of the silicone technology to the paint film: water repellency and... view more

BLUESIL™ BP 9900 by Elkem Silicones is a non-ionic, APEO free, polyorganosiloxane aqueous emulsion. Acts as an anti-blocking agent and water repellent. Provides good water resistance, water vapor... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

BLUESIL™ FLD 45 by Elkem Silicones is a low viscosity dimethylpolysiloxane oil. Acts as a flow/ leveling agent and surface conditioner. Prevents floating and flooding as well as improves the... view more

BLUESIL™ FLD 550 by Elkem Silicones is a clear, low viscosity silicone fluid. Acts as a lubricant. It has low volatility and high flash point (300 °C). Offers good resistance to oxidation and... view more

BLUESIL™ FLD 550HT by Elkem Silicones is a methyl phenyl polysiloxane. It is non-corrosive, radiation resistance and offers damping performance... view more

BLUESIL™ PI 2074 by Elkem Silicones is a (tolylcumyl) iodonium tetrakis (pentafluorophenyl) borate. Acts as a cationic photoinitiator. It is compatible with epoxy resins, vinyl ethers or any other... view more

BLUESIL™ RES 6405 by Elkem Silicones is a 50 % solids methylphenylsilicone resin in toluene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack free... view more

BLUESIL™ RES 6405X by Elkem Silicones is a 50 % solids methylphenylsilicone resin in xylene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack... view more

BLUESIL™ RES 6406XM by Elkem Silicones is a polymethyl phenyl silicone resin in a 60% xylene solution. Provides good flexibility, dry tack-free at room temperature and high temperature resistance... view more

BLUESIL™ RES 6407 by Elkem Silicones is a 70% solids methylphenylsilicone resin in toluene solution. It is solvent based and High temperature resistance (up to 400°C) when used in combination with... view more

BLUESIL™ RES 6482X is a hydroxylated methylphenyl silicone resin in xylene solution. Offers good heat and weathering resistance and high compatibility with organic resins. It is also more compatible... view more

BLUESIL™ RES 991 by Elkem Silicones is a combination of a methylphenyl silicone resin and an acrylic resin. It is a silicone varnish offering significant increases in surface resistivity of... view more

Organic choline salt in a butanol solution. Acts as a siccative agent for silicone resins used for release coatings, bondings for electrical insulation and industrial paints (high temperature... view more

BLUESIL™ TCS 7311 is a one-component silicone elastomer dispersion. Offers curing by acetic acid at room temperature when in contact with air moisture. Cure rate can be accelerated by increasing... view more

BLUESIL™ TCS 7513 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7513 A & 10 parts BLUESIL™ TCS 7513 B). Exhibits solventless technology, very low viscosity... view more

BLUESIL™ TCS 7516 A/B by Elkem Silicones is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7516 A RED/WHT/BLUE & 100 parts BLUESIL™ TCS 7516 B). Exhibits high bond... view more

BLUESIL™ TCS 7534 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7534 A & 10 parts BLUESIL™ TCS Catalyst). It cures by a polyaddition reaction using... view more

BLUESIL™ TCS 7537 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7537 A & 10 parts catalysts - BLUESIL™ TCS 7537 B & TCS 7537 C). It cures by a polyaddition... view more

BLUESIL™ TCS 7550 A/B is a two-component heat curing liquid silicone elastomer dispersion (50 parts BLUESIL™ TCS 7550 A & 50 parts catalysts - BLUESIL™ 7550 B). It cures by a polyaddition reaction... view more

BLUESIL™ TCS 7600 CATA by Elkem Silicones is part of a two-component polyaddition heat-cured screen printable silicone elastomer. It functions as the cure catalyst for the TCS screen printing bases:... view more

BLUESIL™ TCS 7612 Base by Elkem Silicones is a part of a two-component polyaddition heat-cured, low viscosity screen printable silicone elastomer. It is well suited for blending with BLUESIL™ TCS... view more

BLUESIL™ TCS 7664 Base by Elkem Silicones is a part of a two-component polyaddition heat-cured screen printable silicone elastomer with excellent elongation and physical properties. It is well... view more

BLUESIL™ TCS 7671 WHT by Elkem Silicones is a two-component, polyaddition heat cured, liquid silicone elastomer system. It is an environmental friendly (PVC free), heat resistant grade based on... view more

BLUESIL™ TCS 7757 A/B is a two-component heat curing liquid silicone elastomer dispersion (100 parts BLUESIL™ TCS 7757 A & 100 parts BLUESIL™ 7757 B). It cures by a polyaddition reaction using... view more

BLUESIL™ TCS 7774 A/B by Elkem Silicones is a two-component, heat-curing, liquid silicone elastomer. It is cured by a polyaddition reaction. It offers durability, high elasticity, colorless cure and... view more