Borchi® Gol 0011 by Borchers is a modified polysiloxane flow and air release agent for solvent-based and solvent-free coatings systems. It can reduce pigment floating and provides barrier properties... view more

Borchi® Gol 1375 by Borchers is a VOC-, APEO- & silicone-free, interface active for improved substrate wetting, flow and leveling. It is recommended for water- and solvent-based systems. It provides... view more

Borchi® Gol 1473 by Borchers is a VOC-free flow and leveling agent. It is polyether-modified polydimethylsiloxane. It is recommended for topcoats that are cured at room temperature and below 150°C... view more

Borchi® Gol 1474 by Borchers is a VOC-free flow and leveling agent. It provides an improvement in slip properties as well as mar resistance. It can inhibit the formation of surface defects like... view more

Borchi® Gol 1570 by Borchers is a 100% active, VOC-free, modified polydimethylsiloxane for improved flow and leveling properties in coating systems. It provides improved substrate wetting and slip... view more

Luna-EEP supplied by DKSH is ethyl 3-ethoxypropionate. It is a slow evaporation ether-ester urethane solvent. It is recommended for coating formulations. It shows exceptional flow & leveling and... view more

F220 is a solvent-free amine-functional resin formulated to be tough but flexible, lightfast and a highly reactive two-component polyurethane spray coating. It is a reactive partner for... view more

Luna-flow K F505 distributed by DKSH is used as a FCA, flow control agent in powder coatings. It is a masterbatch of an acrylic polymer in carboxylated saturated polyester. Luna-flow K F505 has an... view more

Luna-flow K F615 distributed by DKSH is a FCA, flow control agent in powder coatings. It is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. Luna-flow K F615 has an active... view more

Luna-mer B-55 supplied by DKSH is 1,2,4,5-benzenetetracarboxylic acid, compound with 4,5-dihydro2-phenyl-1h-imidazole (1:2). It is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid... view more

Masil® SF 19 by DyStar is a low viscosity, silicone surfactant and flow & leveling agent. It also acts as an effective wetting agent for polytetrafluoroethylene (PTFE) when used at a level of... view more

LOPON® 827 by ICL is used as a dispersing agent & viscosity stabilizer in silicate-containing coatings. It is a VOC-free amine compound. It provides improved storage stability, improved adding of... view more

LOPON® 828 by ICL is a pH-buffer, dispersing agent and stabilizer in silicate-containing emulsion paints. It is a VOC-free and SVOC-reduced amine compound. It offers improved storage stability and... view more

LOPON® ST by ICL is used as a dispersing agent and stabilizer in silicate-containing coatings. It is cationic amine compound containing small amounts of VOC. LOPON® ST offers improved viscosity... view more

Thetawet™ FS-8250 by Innovative Chemical Technologies is a VOC-free, anionic fluorosurfactant which provides anti-blocking in paints, particularly elevated temperature block resistance. It is 28%... view more

Thetawet™ FS-8000 by Innovative Chemical Technologies is a 100% active, VOC- free, water soluble, non-ionic fluorosurfactant in a low viscosity aqueous solution. It offers excellent wetting and... view more

Thetawet™ FS-8020DB by Innovative Chemical Technologies is a 30% active, water soluble, moderate foaming, anionic fluorosurfactant containing a low vapor pressure solvent. It acts as wetting and... view more

Thetawet™ FS-8020EB by Innovative Chemical Technologies is a 30% active, water soluble, low foaming, anionic fluorosurfactant with tolerance to mineral based fillers (calcium carbonate). It acts as... view more

Thetawet™ FS-8050 by Innovative Chemical Technologies is a 50% active, water soluble, VOC-free, nonionic fluorosurfactant in a low viscosity aqueous solution. It offers excellent wetting benefits... view more

Gasil® 23FJ by PQ Corporation is an anti-caking- and free flow agent. It is also used as a carrier or platting agent for liquids. Offers thickening, product consistency, ease of dispersion and raw... view more

Gasil® GM2 by PQ Corporation is a silica gel-based moisture scavenger/degassing- agent for aluminum paints and free flow agent in powder coatings. It offers product consistency, ease of dispersion... view more

Silcron® G-130 by PQ Corporation is an inorganic surface treated, general purpose matting agent based on synthetic amorphous silica. It is recommended for industrial coatings. It acts as a free-flow... view more

Silcron® G-300 by PQ Corporation is an inorganic surface treated, general purpose matting agent. It is based on synthetic amorphous silica. It also acts as a free-flow agent in powder coatings and... view more

Silcron® G-601 by PQ Corporation is a matting agent based on synthetic amorphous silica. It acts as a free-flow agent in powder coatings. It is suitable for coil-, decorative (wood) and general... view more

ADDITOL® P 824 by allnex is 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix. It can be used in the manufacture of powder coatings. An addition of 3-5% by... view more

ADDITOL® P 890 (Old Name: ADDITOL® E 04149) by allnex is a flow promoter masterbatch for use in indoor and outdoor clear powder coatings. It contains approximately 10% active ingredient in a... view more

ADDITOL® P 891 by allnex is a flow promoter masterbatch suitable for use in powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester... view more

ADDITOL® P 896 by allnex is a flow promoter masterbatch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester... view more

ADDITOL® VXL 4930 by allnex is a modified silicone for improvement of leveling and surface smoothness of solvent containing and aqueous paints. It promotes the spray dust absorption and increases... view more

BRB Siloen® LA 270 by BRB International BV acts as a flow and leveling agent. It is a surface control additive based on silicone polyether copolymer with 10% solids in xylene. It is re-coatable and... view more

BRB Siloen® LA 271 is a flow and leveling agent by BRB International BV. It is glycol-modified silicone fluid suitable for water- & solvent-borne and radiation curing systems with good substrate... view more

BRB Siloen® SMA 283 by BRB International BV is a re-coatable, polyether modified siloxane-based slip and mar resistance agent. Improves substrate wetting and leveling. Offers good smoothness... view more

BRB Siloen® WA 264 is a substrate wetting agent and surfactant by BRB International BV. It is polyether-modified siloxane designed for aqueous coatings with excellent leveling properties. Used at... view more

ACRYTAN TG by Pidilite Industries is a polymeric dispersing agent. It helps in leveling of dyes and uniform distribution of vegetable tanning materials. It enhances dispersion of retanning and helps... view more

PolyFox™ PF-136A by Synthomer is an anionic fluorinated polyether diammonium disulfate polymer-based fluorosurfactant wetting-, flow- and leveling agent. It offers an improved surface appearance and... view more

PolyFox™ PF-151N by Synthomer is a 50% active, non-ionic fluorinated polyether ethoxylated polymer-based fluorosurfactant, wetting-, flow- and leveling agent. It offers improved water resistance and... view more

PolyFox™ PF-154N by Synthomer is a 25% active, non-ionic, fluorinated polyether ethoxylated based fluorosurfactant, wetting-, flow- and leveling agent. It exhibits excellent water solubility with... view more

PolyFox™ PF-156A by Synthomer is an anionic fluorinated polyether diammonium disulfate polymer-based fluorosurfactant, wetting-, flow- and leveling agent. It offers an improved surface appearance... view more

PolyFox™ PF-159 by Synthomer is a 100% active, non-ionic, highly efficient fluorosurfactant wetting-, flow- and leveling agent. It is based on fluorinated (C2F5) polyether ethoxylated polymer with... view more

3M™ Novec™ Fluorosurfactant FC-4434 by 3M is a water-soluble, general purpose non-ionic fluorinated surfactant. Acts as a wetting, flow and levelling agent. Shows lower propensity to form foam in... view more

3M™Novec™ Fluorosurfactant FC-4430 by 3M acts as a flow, levelling and wetting agent. It is a non-ionic polymeric fluorochemical surfactant. Suitable for water-borne, solvent-borne and high-solids... view more

3M™Novec™ Fluorosurfactant FC-4432 by 3M acts as a levelling, wetting and flow agent. Exhibits good thermal stability and is very efficient at reducing the surface tension in aqueous systems. It is... view more

3M™Novec™ Fluorosurfactant FC-5120 by 3M acts as a wetting and flow agent. It is an anionic fluorochemical surfactant supplied as a 25 wt. % solution in a water/ isopropanol blend. Exhibits... view more

Acrylic homopolymer with solid epoxy resin. It acts as a flow modifier. Used in epoxy- and hybrid powder coatings. Recommended usage level is up to 10 phr (per hundred resin) based on total... view more

Polyacrylate absorbed on a silica carrier. It acts as a flow modifier/ flow control agent. Used in powder coatings. Recommended usage level is 0.5-1.5% based on total formulation... view more

Fatty acid derivative. Acts as a charge control agent and flow modifier. It is non-catalytically active and offers non-yellowing. Used in powder coatings. Recommended usage level is 1-3% (as charge... view more

ABC-1484 acts as a leveling agent by ABC Chemical. This grade is recommended for use in solvent-based and solvent-free coatings. ABC-1484 is available as colorless liquid... view more

ABC-254 by ABC Chemical is a leveling agent. It is available as colorless liquid. ABC-254 is recommended for use in solvent-free and solvent-based coatings... view more

ABC-300 by ABC Chemical acts as a leveling agent. It is available as colorless liquid. ABC-300 is designed for use in solvent-based coatings and inks... view more

ABC-302 by ABC Chemical acts as a leveling agent. It is available as colorless liquid. ABC-302 is suitable for use in solvent-based, solvent-free and aqueous coatings... view more

ABC-306 by ABC Chemical acts as a leveling agent. This grade is designed for use in solvent-based coatings and inks. ABC-306 is available as colorless liquid... view more

ADDAPT® BioWet™ 175R by ADDAPT Chemicals is a solvent-free, non-foaming, readily biodegradable wetting- and levelling agent. It is polyhydroxy amide in water. It offers good water retention... view more

ADDAPT® BioWet™ 45 by ADDAPT Chemicals is a non-foaming, ready biodegradable wetting- and levelling agent. It is a blend of polyalkylene glycols and polyhydroxy amide. It exhibits good dynamic and... view more

ADDAPT® BioWet™ 450C by ADDAPT Chemicals is a readily biodegradable, VOC-free wetting- and levelling agent for aqueous systems. It is a proprietary blend of polyalkylene glycols in water and... view more

ADDAPT® BioWet™ 55L by ADDAPT Chemicals is a VOC-free, readily biodegradable wetting-, levelling agent and open time extender. It is a proprietary blend of polyalkylene glycols in water and... view more

ADDAPT® BioWet™ 75 by ADDAPT Chemicals is a non-foaming, biodegradable wetting- and levelling agent. It is polyhydroxy amide in water. It shows excellent static as well as dynamic surface tension... view more

Min-U-Gel® 400 by Active Minerals is attapulgite clay. Acts as a levelling agent and rheology modifier. Aids in suspension of pigments and reduces syneresis which is critical to in-can stability... view more

ADD-3030 by Add Additives is a silicone-based slip, levelling and mar resistance agent. Designed for solvent- and water-based coatings. Exhibits very good compatibility. It can be incorporated at... view more

ADD-3031 by Add Additives is a silicone-based slip and levelling agent. Suitable for solvent-based and UV cured coatings. Designed for metal, wood and paper coatings. It can be incorporated at any... view more

ADD-3033 by Add Additives is a silicone-based slip and levelling agent. Exhibits good surface flow and excellent compatibility. Recommended for solvent-based clear coat applications. It can be... view more

ADD-3034 by Add Additives is a silicone-based wetting, slip and levelling agent. Exhibits strong substrate cratering. Recommended for solvent- and water-based coatings. It is incorporated at the end... view more

ADD-3035 by Add Additives is a silicone-based slip and levelling agent. It is incorporated at the end of processing. Recommended for solvent- and water-based stoving enamels, unsaturated PE and UV... view more

Epotec TH® 983 by Aditya Birla Chemicals is a phenolic based on epoxy resin and bisphenol-A. It acts as a curing agent and flow agent. It contains a curing accelerator and flow modifier. Also found... view more

Anionic fluorosurfactant. APFS-75S acts as an anti-block additive, wetting, flow and leveling agent. It exhibits low aqueous surface tension, eliminates many surface defects and reduces foam. It is... view more

Perfluoroalkylacrylate emulsion. APFS-76S acts as a wetting, flow and leveling agent. It exhibits excellent clean-ability and oil repellency when added to flat finish architectural paints and water... view more

APFS- 74S by Advanced Polymer is a VOC and APEO free fluorophosphate ester. Acts as a wetting, flow, levelling and anti-blocking agent. Exhibits very low surface tension in aqueous solutions... view more

Afcona -2280 by Afcona Additives is an effective, silicon-based defoamer and air-releaser for solvent-based and solvent-free systems. It also acts as a good leveling agent, giving a smooth surface... view more

Organically modified polysiloxane. Offers good defoamer, anti-foam and levelling performances. Has very low sensitivity to formation of craters to the coating, very good performance in high shear... view more

Silicone containing defoamer for water-based systems. Next to the good defoaming properties it also acts as a good leveling agent. Is very easy to incorporate under low shear forces where it will... view more

Silicone based defoamer. Produces rapid deaeration and defoaming of solvent-free epoxy, polyurethane as well some UPE systems. The silicone part is responsible for de-aeration and the non-silicone... view more

Silicone based defoamer. Also acts as air-releaser for unsaturated polyester, polyurethane, UV and epoxy resin systems. In epoxy resin systems will not only gives good defoaming, but also good... view more

KC2110 is hydrogenated castor oil. Used as a leveling agent. It improves the viscosity and surface tension as well as pigment dispersion in powder coatings. Recommended use level is 0.5-2.0%... view more

KC701B is composed of butyl acrylate and methyl methacrylate copolymer. Used as a levelling and brightening agent. It has a good wetting effect on the polarity additives and the substrates to be... view more

KC7020 is an acrylate-modified surfactant. Used as a leveling agent. It exhibits low viscosity, excellent compatibility and recoatability and does not affect intercoat adhesion. Prevents shrinkage... view more

KC758 is a polyacrylate. Used as a leveling agent. It reduces the lubricity of the coating surface and improves adhesion. Suitable for use in epoxy resin powder coating, hybrid polyester resin... view more

Xoanons® WE-D811 by Anhui Xoanons Chemical is a polyacrylate copolymer solution. Acts as a leveling agent. It contains hydroxyl group, participates in resin curing reaction and shows cross-linking... view more

Xoanons® WE-D812 by Anhui Xoanons Chemical is a polyacrylate copolymer solution. Acts as a leveling agent. It contains hydroxyl group, participates in resin curing reaction and shows cross-linking... view more

Xoanons® WE-D819 by Anhui Xoanons Chemical is a polyacrylate copolymer solution. Acts as a leveling agent. It contains hydroxyl group, participates in resin curing reaction and shows cross-linking... view more

Xoanons® WE-D831 by Anhui Xoanons Chemical is a polyacrylate copolymer solution. Acts as a leveling agent. It contains hydroxyl group, participates in resin curing reaction and shows cross-linking... view more

Xoanons® WE-D839 by Anhui Xoanons Chemical is a polyacrylate copolymer solution. Acts as a leveling agent. It contains epoxy group, participates in resin curing reaction and shows cross-linking in... view more

AC-333 by Ark (FoGang) Chemicals Industry is a polyether modified siloxane-based levelling agent. It is suitable for coating systems to reduce surface tension of coatings, increase surface... view more

AC-702 by Ark (FoGang) Chemicals Industry is a highly compatible organic fluorine non-ionic surfactant. It acts as a wetting agent and can reduce surface tension of liquid. It can improve leveling... view more

AC-703 Anionic Fluorocarbon Surfactant by Ark (FoGang) Chemicals Industry is an anionic surfactant with alkali- and high-temperature resistance. It shows excellent performance in interface... view more

AC-805 by Ark (FoGang) Chemicals Industry is silicofluoride based-surfactant. It can reduce surface tension of solvents. It has excellent critical wetting performance. It can improve leveling... view more

Nonionic gemini fluorocarbon surfactant by Ark (FoGang) Chemicals Industry acts as a leveling agent for water-based coatings. It is composed of two fluorocarbon chains, two hydrophilic groups and... view more

Acrylic. Used in coatings. Possesses silicone-free, recoatable and pre-neutralized. Offers improved gloss and DOI... view more

COROC® A-7091 by Arkema is a HAPS-free, polyacrylate surface tension modifier. Reduces cratering, fish eyes and orange peel. It improves gloss and is re-coatable. It is suitable for solvent-borne... view more

COROC® A-7091 by Arkema is a higher molecular weight, polyacrylate surface tension modifier. Reduces cratering, fish eyes and orange peel. It improves gloss and is re-coatable. It is suitable for... view more

Polyacrylate. Acts as a surface tension modifier and flow & levelling agent. Contains no silicone ingredients and is recoatable and pourable. Can be added to coating formulations at any step in the... view more

Acrylate. Acts as a high performance dispersing and flow control agent. It eliminates film surface defects that may occur during the film formation. Contains no silicone ingredients and is... view more

Aquaflow™ NHS-300 is a hydrophobically modified polyether by Ashland Specialty Chemical. Acts as non-ionic associative thickener. It is cost effective, pH insensitive and biostable. Possesses... view more

Aquaflow™ NHS-310 is a VOC-free, hydrophobically modified polyether by Ashland Specialty Chemical. Acts as non-ionic associative thickener. It is a pH insensitive and biostable. Provides superior... view more

Aquaflow™ NLS-205 is a hydrophobically modified polyacetal polyether by Ashland Specialty Chemical. It is free of volatile organic compound. Provides superior flow and leveling, ICI viscosity... view more

Aquaflow™ NLS-210 is a hydrophobically modified polyether by Ashland Specialty Chemical. It acts as a nonionic associative rheology modifier. It is pH insensitive and biostable. Increases the... view more

Aquaflow™ XLS-530 by Ashland Specialty Chemicals is hydrophobically modified polyether. Acts as a non-ionic associative rheology modifier. It is solvent-free, pH-sensitive, bio-stable, exhibits... view more

Diethylene glycol monobutyl ether [2-(2-butoxyethoxy) ethanol]. Acts as a solvent and flow promoter. Exhibits low-volatility, high boiling point and mild odor. Provides compatibility with urea... view more

Diethylene glycol n-butyl ether acetate [2-(2-butoxyethoxy)ethyl acetate]. Acts as a solvent, leveling agent and coalescent. Exhibits compatibility with numerous resins, dyes, waxes, fats and oils... view more

Collacral® VAL by BASF is a protective colloid, polyvinylpyrrolidone. Exhibits good flow and levelling. Collacral® VAL is designed for use in emulsion paints as a co-thickener... view more

Modified polysiloxane emulsion. Promotes the general surface characteristics. Offers improved anti-cratering and substrate wetting properties. Exhibits improved levelling, defoaming, slip and... view more

Efka® 3580 by BASF is a solvent-free modified polysiloxane. Used as leveling and anti-cratering agent for aqueous coatings. Offers good substrate wetting, no intercoat adhesion problems, little or... view more