Sovermol® 819 by BASF is a natural-oil based fatty polyester polyol. It is solvent-free and used in the manufacture of polyurethane. Possesses good gloss development and good pigment wetting... view more

Oleochemical polyester. Used in combination with MDI to produce 2-pack coatings. Offers very high water repellency, low susceptibility to moisture while curing with isocyanate. Eminently suitable... view more

Sovermol® 830 by BASF is a natural, VOC-free, oil-based polyether-ester polyol. Exhibits hardening/curing properties & mechanical characteristics under difficult conditions (high humidity and... view more

Aliphatic polyol. Used as a polyol component for 2 pack coating compounds. Enhances workability time for PUR system. Its shelf life is 1 year... view more

Sovermol® 860 by BASF is a solvent-free, natural oil-based aliphatic polyol. It possesses good gloss development and good pigment wetting characteristics. It is reactive diluent and hydrophobic. It... view more

Sovermol® 908 is a natural-oil based aliphatic dimer alcohol. It is solvent-free, possesses good gloss development and good pigment wetting characteristics. It has good saponification stability... view more

Non-drying alkyd resin based on natural, saturated fatty acids. Used as binder for offset printing inks. Exhibits superior pigment wetting and high pigment loading. Offers very good image/non-image... view more

Stearyl Acrylate 1618 (SA 1618) by BASF is an acrylate monomer. It forms homopolymers and copolymers. Used as feedstock for chemical syntheses because it readily undergoes addition reactions with a wide variety of... view more

Stearyl Acrylate 18 (SA 18) is an acrylate monomer. It imparts hydrophobicity, weatherability, low shrinkage, chemical resistance, flexibility and impact resistance to polymers. It forms... view more

Stearyl Methacrylate 1618 (SMA 1618) by BASF is a monofunctional monomer with a long, hydrophobic chain hydrophobic side chain. It imparts hydrophobicity, weatherability, low shrinkage, chemical resistance, flexibility... view more

Stearyl Methacrylate 1618 F by BASF is an acrylate monomer. It forms homopolymers and copolymers. Used as feedstock for chemical syntheses because it readily undergoes addition reactions with a wide... view more

Oil soluble, nonionic surfactant. Acts as a pigment grinding aid recommended for solvent and latex paint systems. Allows higher pigment concentration. Offers increased gloss in enamels. Retards hard... view more

Texaphor® 963 by BASF is an electroneutral salt of a polycarbonic acid with amine derivatives. Used as anti-floating agent for non-aqueous coatings. Improves the dispersion of pigments and... view more

Texaphor® SF 73 by BASF is the modified polyurethane in a VOC-free carrier. It is used in non-aqueous lacquer, ink-systems, especially where a VOC-free dispersing additive is required such as in... view more

Mixture of highly effective surface-active substances. Used as highly active wetting and dispersing agent for emulsion paints based on PVAc, polyacrylates and their copolymers. Improves substrate... view more

Texaprint® SDCE by BASF is dicaprylether, substitute for mineral oil. It is a high boiling solvent with broad application. Texaprint® SDCE is used for offset printing inks... view more

Texaprint® SJEH by BASF is a fatty acid-2-ethylhexylester, substitute for mineral oil. It acts as a solvent for offset printing inks... view more

view more

Texaprint® SLIP by BASF is a fatty acid isopropyl ester, substitute for mineral oil. Acts as a solvent. Texaprint® SLIP is used for offset printing inks... view more

Texaprint® STEH by BASF is a fatty acid-2-ethyl hexyl ester. Used as solvent for offset printing inks... view more

Texaquart® 253 is an organic salt of quaternary ammonium hydroxide by BASF. Acts as a cationic additive to increases the electrical conductivity. Texaquart® 253 is used in coatings for electrostatic... view more

Texaquart® 3226 by BASF is a polar fatty acid ester. It provides improved storage stability of the powder coating. It prevents building up of direct current potentials during electrostatic powder... view more

Texaquart® 879 N by BASF is 80% solution of tetraalkyl ammonium ethersulphate in butanol based cationic additive. Used as conductivity improver in surface coatings. Offers increased electric... view more

Tinopal® NFW LIQ by BASF is biphenyl-stilbene, a fluorescent optical brightener for water-based coating and overprint varnishes. Shows brilliant bluish whitening effect and good compatibility in a... view more

Tinopal® OB by BASF is a 2,5-thiophenediylbis(5-tert-butyl-1,3-benzoxazole). It is a high molecular weight optical brightener / fluorescent whitening agent of the thiophenediyl benzoxazole class. It... view more

Tinopal® OB CO by BASF is a solid optical brightener. It is suitable for coating and printing ink applications. It shows brilliant bluish whitening effects and good compatibility in a wide range of... view more

Tinopal® SFP by BASF is a triazine-stilbene. It is a liquid water-soluble optical brightener for photographic color developer baths or as fluorescent tracers. Tinopal® SFP is used in general... view more

Special blend of two sterically-hindered amine. Used as a light stabilizer in powder, industrial and coil coatings. Offers better exterior coating durability. Exhibits improved powder adhesion to... view more

Tinuvin® 1130 by BASF is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. It is a versatile product for use in water- and... view more

Tinuvin® 123 by BASF is a liquid, low volatile hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed... view more

Tinuvin® 123-DW by BASF is a non-basic amino-ether. Acts as a UV absorber. It is solvent-free and permits formulation of low/zero VOC coatings. Developed using novel encapsulated additive... view more

Tinuvin® 123-DW (N) by BASF is an aqueous light stabilizer. It is developed for water-based systems and does not contain methylisothiazolinone (MIT). No EUH 208 label (may cause allergic reactions)... view more

Bis (1,2,2,6,6-pentamethyl-4-piperidinyl)-[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]butylmalonate. Used as light stabilizer in automotive coatings, coil coatings and powder coatings... view more

Tinuvin® 152 by BASF is a high performance, low volatile hindered amine light stabilizer. It minimizes paint degradation that could otherwise lead to cracking & gloss loss in clear coats and also... view more

Tinuvin® 171 by BASF is a liquid UV light absorber of the hydroxyphenyl-benzotriazole class. It is used in the solvent-borne coating system. It is applicable in automotive-, general industrial... view more

Tinuvin® 249 by BASF is a low-viscosity, non-basic, hindered amine light stabilizer (HALS) for coatings. It has good long-term performance, high thermal stability and excellent color stability... view more

Tinuvin® 292 by BASF is a liquid hindered amine light stabilizer especially developed for coatings. It provides a significantly extended lifetime to coatings by minimizing paint defects such as... view more

Tinuvin® 292 HP by BASF is a liquid hindered amine light stabilizer for water-based and solvent-based coatings. Used in automotive coatings (non acid catalyzed), especially refinish coatings and... view more

Tinuvin® 328 by BASF is hydroxyphenyl benzotriazole-based UV absorber for ambient and low temperature cured systems. Provides superior protection against gloss reduction, cracking, blistering... view more

Tinuvin® 384-2 by BASF is a liquid UV absorber of the hydroxyphenyl benzotriazole class developed for coatings. It has very high thermal stability and environmental permanence that makes it suitable... view more

Tinuvin® 400 by BASF is a liquid hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs of solvent-borne coatings, 100% solids automotive and... view more

Tinuvin® 400-DW by BASF acts as a UV absorber. Developed using novel encapsulated additive technology. It has high extinction in the UV-B range for high performance applications and low/zero VOC... view more

Tinuvin® 123-DW (N) by BASF is an aqueous light stabilizer. It is developed for water-based systems and does not contain methylisothiazolinone (MIT). No EUH 208 label (may cause allergic reactions)... view more

Tinuvin® 405 by BASF is a solid, non-migrating triazine-based UV absorber for coatings. It offers excellent long-term photo permanence and thermal stability. It is ideal for... view more

Tinuvin® 460 by BASF is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings, light-sensitive substrates and... view more

Tinuvin® 477 by BASF is a liquid, high-performance UV absorber developed for solvent-borne and liquid UV curable coatings. It is suited for the protection of UVA range sensitive substrates or... view more

Tinuvin® 477-DW by BASF acts as a UV absorber. It permits formulating low/zero VOC coatings with excellent photopermanence. Developed using novel encapsulated additive technology. Tinuvin® 477-DW by... view more

Tinuvin® 477-DW (N) by BASF is an aqueous light stabilizer. It is developed for water-based systems and does not contain methylisothiazolinone (MIT). No EUH 208 label (may cause allergic reactions)... view more

Tinuvin® 479 by BASF is hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive OEM & refinish and industrial finishes. It has been... view more

Tinuvin® 479-DW by BASF acts as a UV absorber. It provides excellent photopermenence in thin film applications and very high thermal stability. Developed using novel encapsulated additive... view more

Tinuvin® 5050 by BASF is liquid blend of 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS). Used for a wide range of coatings for wood, plastics... view more

Tinuvin® 5060 by BASF is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high... view more

Hindered amine light stabilizer. Used in general industrial coatings, heavy duty maintenance and marine coatings, plastic coatings, gel coats and composites, architectural and decorative coatings... view more

Tinuvin® 5151 by BASF is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high... view more

Tinuvin® 5248 by BASF is a high performance UVA/HALS blend. Acts as a light stabilizer. Tinuvin® 5248 by BASF is used in transportation, cementitious substrates, general industrial, furniture and... view more

Tinuvin® 5251 by BASF is a blend of HPT UV absorber and a basic HALS. It is suitable for exterior applications. Tinuvin® 5251 by BASF is recommended for use in solvent-based industrial coatings... view more

Hindered amine. It is the first waterborne UVA / HALS blend made from proprietary NEAT technology. Acts as a UV absorber and a light stabilizer. Exhibits superior photo-permanence, superior color... view more

Tinuvin® 5333-DW (N) by BASF is an aqueous light stabilizer. It is developed for water-based systems and does not contain methylisothiazolinone (MIT). No EUH 208 label (may cause allergic reactions)... view more

Tinuvin® 5350 by BASF is a solvent-free UVA/HALS blend. Acts as a light stabilizer. Designed for high performance, non-acid catalyzed systems. Tinuvin® 5350 by BASF is used in transportation... view more

Tinuvin® 900 by BASF is an UV absorber of the hydroxyphenyl-benzotriazole class developed specifically for coating systems exposed to high temperatures and/or extreme environmental stresses. It... view more

Tinuvin® 928 by BASF is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. It provides efficient protection to coatings and light... view more

Tinuvin® 99 by BASF is a liquid hydroxyphenyl-benzotriazole. Acts as a UV absorber. Provides excellent spectral coverage, very high thermal stability and good photopermanence. Tinuvin® 99 is used in... view more

Tinuvin® 99-2 by BASF is a liquid UV absorber of the hydroxyphenyl-benzotriazole class. It is designed to fulfill the high cost/performance and durability requirements of trade sales and industrial... view more

Tinuvin® 99-DW by BASF acts as a UV absorber. It is solvent-free and permits formulation of low/zero VOC coatings. Developed using novel encapsulated additive technology. Tinuvin® 99-DW by BASF is... view more

Tinuvin® 99-DW – new by BASF is a multipurpose UV absorber dispersion. It has improved active content and shows non-settling behavior. Tinuvin® 99-DW – new by BASF is recommended for use in... view more

Tinuvin® 9945-DW (N) by BASF is an aqueous light stabilizer. It is developed for water-based systems and does not contain methylisothiazolinone (MIT). No EUH 208 label (may cause allergic reactions)... view more

Tinuvin® B 75 by BASF is a synergistic blend of 20% Irganox 1135, 40% Tinuvin® 571 and 40% Tinuvin® 765. Acts as a light and heat stabilizer. It is an easy to pump, pourable liquid allowing dust... view more

Tinuvin® CarboProtect® by BASF is a very red-shifted, benzotriazole-based UV absorber. Designed for solvent-based clear or semi-transparent coatings over carbon fiber-reinforced plastics (CFRP) or... view more

Tinuvin® PUR 866 by BASF is a high performance light stabilizer package. Shows excellent initial color, superior color retention during UV exposure, enhanced long-term thermal stability and easy... view more

Translink® 37 by BASF is a high brightness surface treated kaolin. It is a high-performance reinforcing extender designed to reduce water transmission in cross-linked polyethylene and EPR polymer... view more

Translink® 445 by BASF is a calcined and surface-treated aluminosilicate. Acts as a high-performance reinforcing extender. It reduces water absorption, increases tensile and flexural strength... view more

Calcined and surface-treated aluminosilicate. Acts as a high-performance reinforcing extender. Its low residue and finer particle size offers excellent impact strength in engineered polymers. It is... view more

Translink® 77 by BASF is surface treated kaolin. It acts as a high-performance reinforcing extender. Provides excellent initial and aged wet electrical properties. Translink® 77 is recommended for... view more

Trasol® KA-N by BASF is a potassium silicate solution with a high silica content. Acts as a binding agent. It penetrates into the substrate and its porosity inhibits condensation of water. Has... view more

Trasol® KC-K by BASF is a UV stable, potassium silicate solution with a high silica content. It penetrates into the substrate and its porosity inhibits condensation of water. It possesses heat... view more

Trasol® KE-K by BASF is a UV stable binding agent. It is a potassium silicate solution with a high silica content. It penetrates into the substrate and its porosity inhibits condensation of... view more

Trasol® KH-K by BASF is a UV stable, potassium silicate solution with a high silica content. It penetrates into the substrate and its porosity inhibits condensation of water. It possesses heat... view more

Trasol® KI-S by BASF is potassium silicate solution with high silica content. Acts as a binding agent. It penetrates into the substrate and its porosity inhibits condensation of water. Has low... view more

Trasol® KW-N by BASF is a UV stable binding agent. It is a potassium silicate solution with a high silica content. It penetrates into the substrate and its porosity inhibits condensation of... view more

Triethylene Glycol Dimethacrylate (T3EGDMA) is a hydrophilic difunctional methacrylic monomer. It forms homopolymers and copolymers which can be prepared with acrylic acid and its salts, amides and... view more

Triethyleneglycol divinyl ether (DVE-3) by BASF is triethyleneglycol divinyl ether. It has high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of syntheses including... view more

Trilon® B by BASF is thylenediaminetetraacetic acid and its sodium and ammonium salts. Acts as a chelating agent. It forms stable complexes and has a shelf life of 2 years. Designed for use in... view more

Trycol® 7000 by BASF is a water-soluble surfactant. It is a versatile wetting agent and emulsifier for latex paints and alkyd-based paints. Trycol® 7000 exhibits very good wetting and emulsifying... view more

Ultradispers AB 30 by BASF is an ammonium salt of carboxylic acid copolymer. It is recommended for inorganic pigments and extenders. It offers improved adhesion & gloss. It can lower the snail-trail... view more

Ultradispers MD 21 by BASF is a sodium salt of carboxylic acid copolymer. It acts as a dispersing agent. It offers highest wet scrub resistance and hydrophobic characteristics. Ultradispers MD 21 is... view more

Ureido Methacrylate 25 % in Methyl Methacrylate (UMA 25%) is an acrylate monomer. A monofunctional methacrylate forms homopolymers and copolymers. Its copolymers can be prepared with acrylic acid... view more

Versamine® 551 by BASF is aliphatic, high molecular diamine-based crosslinker. Exhibits low pour point, high flash point and characteristic ammoniacal odor. It will react with organic diacids for... view more

Versamine® 552 by BASF is a versatile, reactive liquid diamine. Acts as a crosslinker. It reacts with organic diacids to form polyamides. Versamine® 552 by BASF has low pour point and high flash... view more

Versamine® 900 by BASF is a modified amine. It can also acts as curing agent. It is a low viscosity, liquid epoxy hardener that is an excellent modifier for polyamides and amidoamines. Versamine®... view more

Versamine® 908 by BASF is a modified amine. It can also acts as curing agent. It is a low viscosity epoxy hardener solution with a high crosslinking rate. Versamine® 908 provides fast cure at low... view more

Versamine® 911 by BASF is the modified amine epoxy hardener. It is designed for applications with blush-free surfaces having good flexibility. It offers medium viscosity and light colored... view more

Versamine® A 52 by BASF is adducted aliphatic amine based curing agent. Provides very good bloom or blush resistance, wide formulating parameters and very good chemical resistance properties... view more

Very low viscosity, fast setting room temperature curing agent for liquid and solid epoxy resins. Offers high heat resistance, very good chemical resistance and outstanding gasohol, ethanol and... view more

Versamine® A 57 by BASF is a modified aliphatic amine adduct. It acts as an epoxy curing agent. It is a potential solution to replace aromatic amines in some chemical resistant trowellable tank... view more

Versamine® C 30 by BASF is a curing agent for liquid and solid epoxy resins. It provides very good chemical resistance, good color retention, very good flow, and blush resistance. It has low... view more

Versamine® C 31 by BASF acts as a curing agent for liquid and solid epoxy resins. It is a low viscosity, very light colored, moisture insensitive room temperature, cycloaliphatic amine. It provides... view more

Versamine® C 33 by BASF is a cycloaliphatic amine curing agent for reaction with liquid epoxy resin in coatings. It offers low viscosity, light colored and moisture. It is susceptible to carbonation... view more

Versamine® C 36 by BASF is the cycloaliphatic amines adduct. It acts as an epoxy curing agent. It provides good color and moderate chemical resistance. It exhibits resistance to water spotting early... view more

Versamine® C 39 by BASF is a modified cycloaliphatic amine. Provides excellent flow/leveling and chemical resistance. Versamine® C 39 is a very low viscosity amine adduct for high solids coatings... view more

Versamine® C 40 by BASF is a curing agent for liquid and solid epoxy resins. It provides very good chemical resistance, good color retention, very good flow, blush resistance, good adhesion, and... view more

Versamine® C 42 by BASF is a modified cycloaliphatic amine. Provides good blush resistance. Versamine® C 42 is an economical curing agent with fast cure times... view more

Versamine® C 44 by BASF is a modified cycloaliphatic amine. It is an accelerated adduct with excellent cure, little-no blush at low temperatures and high humidity. Versamine® C 44 provides early... view more

Versamine® C 52 by BASF is a modified cycloaliphatic amine. It is rapid curing agent with good color retention. Versamine® C 52 provides excellent blush, exterior exposure and chemical resistance... view more

Versamine® C 74 by BASF acts as a hardener for epoxy resins. It exhibits very good early water resistance. It offers blush free surfaces when applied at low temperatures around 10°C and high... view more

Versamine® EH 30 by BASF is a tertiary amine accelerator. Acts as a catalyst. Versamine® EH 30 is suitable for polyamide and amidoamine cured epoxies, mercaptans, anhydride and novolac epoxy cures... view more

Versamine® EH 50 by BASF is a low odor, light color, non-corrosive, formaldehyde-free tertiary amine. Acts as an accelerator and a curing agent. Suitable for room and low-temperature cure. Offers... view more

Versamine® F 11 by BASF is a low odor, medium viscosity amine functional epoxy curing agent. Used as a sole curing agent and an accelerator for other curing agents for industrial, marine and... view more

Versamine® F 19 by BASF is the amine functional epoxy curing agent. It is designed specifically for low-temperature fast curing of epoxy resins. It offers fast-set characteristic and wide... view more

Versamine® F 30 by BASF is the functional epoxy amine. It acts as a curing agent. It shows more flexibility and gives longer working times than commonly used phenol or mercaptan catalyzed systems... view more

Versamine® F 40 by BASF acts as an accelerator. Suitable for polyamide based hardeners in formulating coating systems. It is listed in TSCA, EINECS, DSL/NDSL, PICCS, AICS, ENCS/MITI, ECS... view more

Low viscosity curing agent. Used for formulating solvent-free epoxy coatings. Also used as an accelerator for both amine and amide based hardeners. Shows severe yellowing... view more

Low viscosity, phenol-free amino curing agent for epoxy resins, particularly suggested for solventless systems. Offers very good flow, high chemical resistance and elasticity of mixing ratio with... view more

Versamine® S 1 by BASF is the accelerated aliphatic amine adduct. It acts as curing agent. It possesses low yellowing characteristics and very good chemical resistance. Versamine® S 1 exhibits extremely... view more

Versamine® S 2 by BASF is the modified amine. It offers low viscosity and is light colored. It offers very good blush free cure under a variety of conditions... view more

Versamine® S 23 by BASF is a modified cycloaliphatic amine. It is benzyl alcohol, nonylphenol- and bisphenol A-free. Versamine® S 23 is an accelerated adduct designed to be used as a stand alone... view more

Versamine® S 3 by BASF is the accelerated amine adduct. It provides very good chemical resistance. It offers low yellowing characteristics. Versamine® S 3 is used as curing agent for its rapid cure... view more

Ultra low viscosity epoxy curing agent. Exhibits rapid cure and little or no blush at both standard and low temperatures. Offers good chemical resistance. Used in very high solids coatings and... view more

Fast curing modified amine. Acts as an epoxy curing agent. Also acts as an accelerator. Used in formulations of coatings, floorings, and mortars for standard conditions and low temperatures. Does... view more

Vinyl Methyl Oxazolidinone (VMOX) by BASF is a liquid vinyl monomer with a very low viscosity. Exhibits high reactivity in the copolymerization with acrylates and excellent adhesion on all common... view more

Vinylphosphonic acid (VPA) by BASF is the monomer. It is ideal for a wide range of syntheses including polymerization, addition, and electro cyclic reactions. It offers high reactivity, exceptional quality... view more

Vinylphosphonic acid dimethyl ester (VPADME) by BASF is the monomer. It exhibits high reactivity, exceptional quality, and good consistency. It is great for syntheses including polymerization, addition, and electro cyclic... view more

Formulation based on an acrylic copolymer in an aliphatic hydrocarbon. Contains a small amount of surfactant. Used as a highly effective rheological control additive in latex. Provides rheological... view more

Viscalex® VG 2 by BASF is a non-associative alkali swellable acrylic dispersion. It acts as an excellent high-shear thickener. It exhibits newtonian flow behaviour. Viscalex® VG 2 offers excellent... view more

Waterpoxy® 1422 by BASF is solid epoxy resin emulsion in water. Used in combination with curing agent for formulating water-based anti-corrosive coating systems, primers and protective coatings for... view more

Waterpoxy® 1455 by BASF is solid epoxy resin emulsion in water. Improves fast drying/curing characteristics. Offers very good protective performance. Provides excellent wetting properties enabling... view more

Solid epoxy resin dispersion in water. Used as a curing agent for formulating water-based anticorrosive coating systems, primers and protective coatings for concrete. Improves fast drying/curing... view more

Waterpoxy® 603 by BASF is the polyamide-based hardener in water solution. It provides high gloss, low yellowing, and good chemical resistance. It suits for inside application on cementitious... view more

Amine based curing agent in water solution. Acts as a curing agent to cure epoxy resin emulsions and standard liquid epoxy resins. Offers very fast drying speed, long pot-life, and good corrosion... view more

Amine based curing agent in water solution. Acts as a curing agent to cure epoxy resin emulsions and standard liquid epoxy resins. Offers very fast drying speed and long pot-life. Provides good... view more

Waterpoxy® 760 by BASF is amine-based curing agent in water solution. Used to formulate high thickness self leveling flooring. Offers definable potlife end point and good chemical resistance... view more

Waterpoxy® 801 is an amine-based epoxy hardener in a solution of water and propylene glycol methyl ether designed to cure epoxy emulsions. Waterpoxy® 801 is recommended in applications such as... view more

Waterpoxy® I 654 by BASF is the amine-based hardener in water solution. It offers very good adhesion and low odor. It provides high gloss, low yellowing, good chemical resistance to water and diluted... view more

Carbonic acid, ammonium zinc salt (2:2:1). Acts as a crosslinking agent. It is colorless. Recommended for overprint varnish, industrial coating and functional packaging coating applications... view more

iso-Butyl vinyl ether by BASF is a O-vinyl monomer. It has high reactivity, exceptional quality and shows the good consistency. It is the best choice for a wide range of syntheses including... view more

iso-Decyl Acrylate (IDA) by BASF is a monofunctional monomer with a long chain hydrophobic tail. Forms homopolymers and copolymers. Used as feedstock for chemical syntheses. Imparts flexibility and good... view more

iso-Decyl Methacrylate (IDMA) by BASF is a hydrophobic, low viscosity, monofunctional, strength. and plasticizing monomer. Forms homopolymers and copolymers. Used as feedstock for chemical syntheses. Imparts low... view more

iso-Tridecyl Methacrylate (C13MA) by BASF is an acrylate monomer. It forms homopolymers and copolymers. Used as feedstock for chemical syntheses because it readily undergoes addition reactions with a wide variety of... view more

n-Butanol® by BASF is a clear, colorless, mobile, neutral solvent of medium volatility. Prevents blushing of coatings when they dry under humid conditions. Widely used as a diluent in cellulose... view more

Clear, moderately volatile, acetic acid n-butyl ester. Acts as a moderately volatile, colorless solvent for paints. Possesses a characteristic ester odor, and good solvent power for cellulose... view more

n-Butyl vinyl ether by BASF is a vinyl monomer that exhibits high reactivity, exceptional quality, and good consistency. It shows wide range of syntheses including addition, polymerization, and electro... view more

n-Propyl alcohol. Acts as a very pure, clear, polar, mobile, colorless, neutral solvent for coatings and inks industry. Possesses average voaltility and a characteristic alcoholic odor. Shows less... view more

tert-Butyl Acrylate (TBA) is an acrylate monomer. It imparts hydrophobicity, chemical stability, hardness, scratch resistance, weatherability, hardness and crosslinking properties to polymers. It... view more

tert-Butyl Methacrylate (TBMA) by BASF is methacrylic acid ester. It forms homopolymers and copolymers which can be prepared with acrylic acid and its salts, amides and esters, acrylonitrile, maleic... view more

tert-Butylaminoethyl Methacrylate (TBAEMA) is an acrylate monomer. A monofunctional methacrylate forms homopolymers and copolymers. Its copolymers can be prepared with acrylic acid and its salts... view more

tert.-Butyl vinyl ether by BASF can be used as monomer for polymerization, cross-linking monomers, and reactive diluents for UV curing. It offers high reactivity, exceptional quality, and good consistency... view more

Efka® FL 3277 (Old name: Efka® 3277) by BASF is a fluorocarbon-modified polymer. It acts as a defoamer, leveling agent, anti-cratering agent and de-aeration aid. It prevents cratering, offers... view more

Efka® FL 3600 by BASF is an anti-catering agent and flow control & leveling agent. It reduces the surface tension of organic coating systems. Offers good compatibility and effective... view more

Efka® FL 3650 by BASF is a polymeric levelling and wetting agent. It reduces surface tension of organic coating systems. Efka® FL 3650 is suitable for stoving enamels based on alkyd, acrylic and... view more

Efka® FL 3772 by BASF is a slip and leveling agent. It can be neutralized with ammonia or triethylamine. It prevents cratering and orange-peel. It helps substrate wetting and improves adhesion... view more

Efka® FL 3777 (old name: Efka® 3777 N) by BASF is a defoamer, anti-cratering agent and leveling agent based on fluorocarbon modified polymer. Offers improved levelling, prevents cratering and helps... view more

Efka® SI 2008 (Old name: Perenol® E 8) by BASF is a solution of modified silicone based air release agent. It is especially designed for medium- and long oil alkyds, 2-pack epoxy, unsaturated... view more

Efka® SI 2025 by BASF is a silicone-based defoamer for solvent-based coatings. It prevents the formation of foam and blisters. Efka® SI 2025 is used in solvent-based coatings such as air-drying... view more

Efka® SI 2035 by BASF is a silicone-based defoamer for solvent-based coatings. It prevents the formation of foam and blisters during the manufacturing and application. Recommended applications... view more

Efka® SI 2040 by BASF is a defoamer. It is a silicone-based defoamer for solvent-based coatings. It prevents the formation of foam and blisters during manufacturing and application. It is... view more

Efka® SI 2721 by BASF functions as a defoamer in the production stage and during application without giving curtain rupture in curtain coatings. It is specially developed for UV-curable systems... view more

Efka® SL 3034 by BASF is a leveling agent and anti-cratering agent. Offers improved surface smoothness. Exhibits improved slip prevents floating. Enables improved substrate wetting caused by reduced... view more

Aqueous solution of an acrylamide polymer. Used to increase printing process efficiency of water-based flexographic inks. Provides cleaner and more defined print images, strong self-cohesion... view more