Saturated, carboxylated polyester resin. Used for TGIC cure in powder coatings for architectural purposes. Offers good flow, outdoor durability and medium cure... view more

Saturated, carboxylated polyester resin. Used for TGIC cure in powder coatings for architectural purposes. Offers enhanced gas oven resistance, flexibility, outdoor durability and medium cure... view more

Saturated, carboxylated polyester resin. Used for epoxy resin cure in powder coatings. Offers good flow and curing time... view more

Uralac® P 5040 is a saturated, carboxylated polyester resin by Covestro. Used for epoxy resin cure in powder coatings. Exhibits good mechanical properties, good flow, pigment wetting and medium... view more

Saturated, carboxylated polyester resin. Used for epoxy resin cure in powder coatings. Offers good flow/cure balance, pigment wetting, recoatability and medium cure... view more

HI-REZ KR-100 by Cytech Coatings (Cytech Group) is a transparent, alcohol soluble, aldehydeketone resin. It improves pigment wetting and gloss. It exhibits improved inner-coat adhesion and broad... view more

HI-REZ KR-500 by Cytech Coatings (Cytech Group) is a polyketone resin with higher hydroxyl value. It imparts fastest solvent release, improved heat- and blocking resistance. It improves inner-coat... view more

4032 Carbon Black by DCL Corporation is carbon black. It is a medium particle size, low cost granular grade. It has medium viscosity and jetness. 4032 Carbon Black is recommended for decorative... view more

410 Carbon Black by DCL Corporation is smaller particle size, granular carbon black. It is low cost carbon black with highest viscosity. 410 Carbon Black is recommended for decorative-, industrial... view more

LANSCO 4076 Carbon black by DCL Corporation is low cost granular carbon black. It is less jet and lowest in viscosity. LANSCO 4076 Carbon black is good for tinting systems... view more

FINEDIC A-241 by DIC is an acrylic resin. Acts as an anti-cratering agent. FINEDIC A-241 by DIC is used in powder coatings... view more

FINEDIC A-251 by DIC is an acrylic resin. Acts as an anti-cratering agent. FINEDIC A-251 by DIC is used in powder coatings... view more

FINEDIC A-253 by DIC is a diacid-cured glycidyl-containing acrylic resin. It is highly evaluated as environmentally-friendly coatings because it does not release VOCs when forming coating films and... view more

FINEDIC A-254 by DIC is a diacid-cured glycidyl-containing acrylic resin. It is highly evaluated as environmentally-friendly coatings because it does not release VOCs when forming coating films and... view more

Unsaturated polyester resin. Used in UV-curable (powder) coatings in combination with vinylether urethane resin. Offers good flow... view more

Zero-VOC vinylether urethane resin. Acts as a crosslinker. Offers excellent hardness (4H) with maximum flexibility & scratch- and chemical- resistance. Exhibits durability & good staining and... view more

DENKA ASR by Denka is a vinyl acetate polymer-based resin. It exhibits outstanding and superior adhesiveness. It possesses solubility in alkaline water solutions and various organic solvents... view more

DENKA POVAL K-05 by Denka is a water-soluble, fully hydrolyzed polyvinyl alcohol (PVOH) grade. It is made from vinyl acetate monomer through polymerization and saponification process. It offers... view more

DENKA POVAL K-17E by Denka is a polyvinyl alcohol (PVOH) grade. It is a water-soluble, fully hydrolyzed polymer. It is made from vinyl acetate monomer through polymerization and saponification... view more

Granules Iron Oxide Black 330G by Deqing E-Sail Pigments is a black colored iron oxide pigment. The pigment is present in the form of tiny spheres and exhibits good fluidity and low dust. Granules... view more

Granules Iron Oxide Black 722 by Deqing E-Sail Pigments is a black colored iron oxide pigment in cubic shape. The pigment is present in the form of tiny spheres and exhibits good fluidity and low... view more

Granules Iron Oxide Red 120 by Deqing E-Sail Pigments is a red colored iron oxide pigment in diamond shape. The pigment is present in the form of tiny spheres and exhibits good fluidity and low... view more

Granules Iron Oxide Red 130G by Deqing E-Sail Pigments is a red colored iron oxide pigment. The pigment is present in the form of tiny spheres and exhibits good fluidity and low dust. Granules Iron... view more

Granules Iron Oxide Yellow 313 by Deqing E-Sail Pigments is a yellow colored iron oxide pigment in acicular shape. The pigment is present in the form of tiny spheres and exhibits good fluidity and... view more

Gum rosin. It is an unsaturated macromolecular polymer which is condensed & esterified with dual acid and multi alcohol. Provides heat- and light stability. Offers features like anti-pressure... view more

Gum rosin. It is an unsaturated macromolecular polymer which is condensed & esterified with dual acid and multi alcohol. Provides heat- and light stability. Offers features like anti-pressure... view more

Gum rosin. It is an unsaturated macromolecular polymer which is condensed & esterified with dual acid and multi alcohol. Provides heat- and light stability. Offers features like anti-pressure... view more

Gum rosin. It is an unsaturated macromolecular polymer which is condensed & esterified with dual acid and multi alcohol. Provides heat- and light stability. Offers features like anti-pressure... view more

Gum rosin. It is an unsaturated macromolecular polymer which is condensed & esterified with dual acid and multi alcohol. Provides heat- and light stability. Offers features like anti-pressure... view more

DEUREX® A 20 G by Deurex is a temperature stable ethylene-bis-stearamide wax (EBS) grade. Suitable for use in printing inks, paints and coatings. Acts as an internal lubricant and dispersing agent... view more

DEUREX® A 20 K by Deurex is a temperature stable ethylene-bis-stearamide wax (EBS) grade. Designed for printing inks, paints and coatings. Acts as an internal lubricant and dispersing agent. Shows... view more

Ethylene-bis-stearamide-wax(EBS). Acts as release agent-and antiblocking agent for polyolefine-flow distribution as well as internal lunbricant. Has temperature stability... view more

Erucamide wax. Has good antiblocking, very good slip, good recoatability and wet print properties. Offers higher temperature stability than DEUREX® A 73, improvement of overall production process... view more

Oleamide wax. Has good antiblocking, very good slip, good recoatability and wet print properties. Offers improvement of overall production process due to reduced adhesion and friction. Used in... view more

DEXICRYL 07V03 H (Hard) by DexVin Polymers is an aqueous polymer dispersion of VAM VEOVA 10 copolymer. It is recommended for primers and textured finishes. The shelf life of DEXICRYL 07V03 H (Hard)... view more

Dovernox® D-311 by Dover Chemical (ICC Industries) is a blend of phenolic and phosphite-based antioxidants. Used in powder and coil coating formulations. Prevents discoloration and loss of physical properties... view more

Dovernox® D-9411T by Dover Chemical (ICC Industries) is a high performance phosphite blend with excellent cost/performance as a polymer stabilizer. It is to be used in various polymer formulations as an excellent... view more

Kwark® GL by ENERSENS is a high performance silica aerogel. This grade is an innovative filler. It is suitable for durable, lightweight, breathable, inert and sound attenuation products. It provides... view more

Kwark® GM by ENERSENS is a high performance silica aerogel. This grade is an innovative filler. It provides low thermal conductivity. It is suitable for durable, lightweight, breathable, inert and... view more

Kwark® GS by ENERSENS is an innovative filler. It is a high performance silica aerogel. It provides low thermal conductivity. It is suitable for durable, lightweight, breathable, inert and sound... view more

Active imidazole. Acts as a catalyst. It facilitates dispersion and avoids hot spots of the catalyst during powder manufacture. It accelerates the cure of coatings based on the carboxyl-epoxy... view more

Acrylic solid resin. Acts as a gloss control agent. When used with an epoxy curing agent, it can provide an exceptionally smooth, matte coating with good mechanical and chemical resistance... view more

Carboxyl-functional, solid acrylic resin. Acts as a matting agent. Provides good smoothness and exceptional mechanical and chemical resistance properties to the coatings. The coatings formulated... view more

Acts as an imidazole type of curing agent. It provides excellent chemical resistance, mechanical properties and the capability for low temperature cure to the coatings. The coatings based on it can... view more

Epoxy Hardener G-92 by Estron Chemical acts as a phenolic curing agent. It provides excellent chemical resistance, mechanical properties to the coatings. It offers formulators the versatility of using differing... view more

AP 810 G by Everkem is a decabromodiphenyl ethane grade. Acts as a flame retardant. Applications include paints and textile-back coating. AP 810 G complies with Regulation 1907/2006 of the... view more

CP 70 XF G by Everkem is a chlorinated paraffin CP-70 grade. Acts as a flame retardant. Applications include paints and textile-back coating. Complies with Regulation 1907/2006 of the European... view more

High molecular weight, moderately crystalline, thermoplastic copolyester. Used as a raw material for heat sealing lacquers and industrial coatings. Offers low water uptake. Provides moderate open... view more

DYNAPOL® S 1227 is a high molecular weight, moderately crystalline, thermoplastic copolyester. Used as a raw material for heat sealing lacquers and industrial coatings. Offers low water uptake... view more

DYNAPOL® S 1247 by Evonik is a high molecular weight, moderately crystalline, thermoplastic copolyester. Used as a raw material for heat sealing lacquers and industrial coatings. Offers low water... view more

High molecular weight, moderately crystalline, thermoplastic copolyester. Used as a raw material for heat sealing lacquers and industrial coatings. Offers low water uptake. Provides moderate open... view more

High molecular weight, moderately crystalline, thermoplastic copolyester. Used as a raw material for heat sealing lacquers and industrial coatings. Offers low water uptake. Provides moderate open... view more

Nofia® OL1001 by FRX polymers is a phosphorus-based flame retardant. It contains phenolic end groups suitable for flame retarding thermoset resins such as unsaturated polyesters, epoxy, polyurethane... view more

Nofia® OL3001 by FRX polymers is a phosphorus-based flame retardant. It contains phenolic end groups suitable for flame retarding thermoset resins such as unsaturated polyesters, epoxy, polyurethane... view more

Aliphatic hydrocarbon resin. Has easy mutual solubility and is resistant to water, ethanol and chemicals. Also possesses chemical stabilizing property to acid and alkaline, viscosity adjusting and... view more

Flint Group 12DT376 by Flint Group is a disazo grade. It is a transparent and granular yellow color organic pigment. Exhibits light- and alcohol resistance. Also exhibits excellent water-, acid- and... view more

Carbon Black by Foshan Xintu Chemical is a carbon black pigment for solvent-based coatings. It exhibits strong tinting strength. Carbon Black is suitable for high level oil paint, printing inks and... view more

Zinc oxide. Acts as a filler. It is available as white powder or solid. It shows reduced dusting and improved flow characteristics. Used in enamels and inks. It complies with TSCA and NPRI... view more

Zinc oxide. Acts as a filler. It is available as white powder or solid. It shows reduced dusting and improved flow characteristics. Used in enamels and inks. It complies with TSCA and NPRI... view more

Potassium Carbonate Tech Granular. Used for printing inks... view more

GRAFTALLOY™ LL-PEG 00120 by Graft Polymer is a linear low density polyethylene (LLDPE) and polyethylene glycol (PEG) alloy. It acts as an adhesion promoter. It helps in modifying the surface... view more

Maleic anhydride grafted polyethylene. Possesses good properties such as high bonding strength, long term stability, wide compatibility, easy processing etc. Used in plastic coating and metal top... view more

Maleic anhydride grafted polyethylene. Possesses good properties such as high bonding strength, long term stability, wide compatibility, easy processing etc. Used in plastic coating and metal top... view more

Maleic anhydride grafted polyethylene. Possesses good properties such as high bonding strength, long term stability, wide compatibility and easy processing. Used in plastic coating and metal top... view more

Granular Iron Oxide Black G330 by Hangzhou Epsilon Chemical is synthetic iron oxide. It is black inorganic pigment. Granular Iron Oxide Black G330 is used in paints and coatings... view more

Granular Iron Oxide Brown G663 by Hangzhou Epsilon Chemical is synthetic iron oxide. It is brown inorganic pigment. Granular Iron Oxide Brown G663 is used in paints and coatings... view more

Granular Iron Oxide Orange G2040 by Hangzhou Epsilon Chemical is mixture of synthetic iron hydroxide and synthetic iron oxide. It is an inorganic pigment. Granular Iron Oxide Orange G2040 is used in... view more

Granular Iron Oxide Red G130 by Hangzhou Epsilon Chemical is synthetic iron oxide. It is red inorganic pigment. Granular Iron Oxide Red G130 is used in paints and coatings... view more

Granular Iron Oxide Yellow G313 by Hangzhou Epsilon Chemical is synthetic iron hydroxide. It is yellow inorganic pigment. Granular Iron Oxide Yellow G313 is used in paints and coatings... view more

2-Methylimidazole by Hangzhou Right Chemical is a curing accelerator. 2-Methylimidazole is suitable in powder coatings. The shelf life of the grade is 1 year... view more

ALX-X120 is an aromatic hydrocarbon resin by Henan Anglxxon Chemical. It can lower the mooney viscosity of compound. It is recommended for coating & printing inks. ALX-X120 shows excellent... view more

HR-R5300 by Henan Sanjiangyuan Chemical is a C5 hydrocarbon resin. It is recommended for hot melt road marking paint. It offers tenacity and rigidity. It can form smooth paint surface and ensure... view more

HR-R5301 by Henan Sanjiangyuan Chemical is a C5 hydrocarbon resin. It is recommended for hot melt road marking paint. It offers tenacity and rigidity. It can form smooth paint surface and ensure... view more

PR-120-10 by Henghe Materials & Science Technology is thermal hydrocarbon grade. It is suitable for paints and inks. It offers good heat stability, solubility, good chemical stability and water... view more

PR-120-11 by Henghe Materials & Science Technology is thermal hydrocarbon grade. It is suitable for paints and inks. It offers good heat stability, solubility, good chemical stability and water... view more

Hansa® Yellow 10G 41 gran. by Heubach is a very green shade monoazo pigment in granule form. It has great and improved recrystallization stability. It offers good dispersibility property with dissolver. It... view more

Hansa® Yellow G 02 gran. by Heubach is a single azo yellow organic pigment. It exhibits excellent light fastness and very good rheological properties. Hansa® Yellow G 02 gran. is used in general industrial paints, decorative... view more

Hansa® Yellow G 03 gran. by Heubach is a single azo yellow organic pigment. It is used in general industrial paints, decorative paints, offset printing and packaging printing (solvent-based and aqueous based)... view more

Hostanol® HW 30 Red HF2B by Heubach is a non-dusting pigment preparation in microgranular form, with low-viscosity polyvinyl butyral as binder. Pigment preparation offers a very good solubility in alcohols and... view more

MONOLITE® TR - Blue 100 by Heubach is a blue colored transparent, super-dispersible color-rich alpha-mod copper phthalocyanine pigment grade. Exhibits high transparency, rich chroma, high gloss, low haze, low... view more

A-C® 316 by Honeywell is a hard, high drop point, high density, oxidized polyethylene homopolymer. Used in water borne coatings and inks, overprint varnishes and polishes to improve surface... view more

A-C® 325 by Honeywell is a high density, oxidized polyethylene homopolymer powder. It is a hard grade with high drop point. Used in water-borne coatings and inks, overprint varnishes and polishes to... view more

A-C® 330 is a high density, hard, high drop point, oxidized polyethylene homopolymer by Honeywell. Used in overprint varnishes, water borne coatings and inks and polishes to improve surface... view more

A-C® 392 by Honeywell is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granules). It improves surface properties including mar- and abrasion resistance... view more

A-C® 395 by Honeywell is a hard, high-density oxidized polyethylene homopolymer grade with high drop point. Designed to improve surface properties including mar and abrasion resistance by... view more

Light stabilizer. Used to expand service life of automotive coatings... view more

Poly[[6-[(1,1,3,3-tetramethylbutyl)amino]-s-triazine-2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)imino]-hexamethylene-[(2,2,6,6-tetramethyl-4-piperidyl)imino]]. Acts as a light stabilizer. Used to... view more

N,N,N’,N’-tetrakis (β-hydroxyethy) adipamide (HAA). It acts as a curing agent. It has mechanical properties & good weather durability and is non-toxic. It is used with carboxyl-terminated polyester... view more

N,N,N’,N’-tetrakis (β-hydroxyethy) adipamide (HAA). It acts as a curing agent. It has mechanical properties & good weather durability and is non-toxic. It is used with carboxyl-terminated polyester... view more

Polyacrylate resin. It acts as a matting agent. It exhibits outstanding matting effect with gloss and good anti-impact property. It has excellent leveling property and coating produced exhibits to... view more

It acts as a wetting agent and brightening agent. It eliminates film crater, fish-eye & pinhole, enhances anti-fouling and increases film gloss. It improves levelling & flatness, promotes... view more

It acts as a matting agent. It is synthesized from tailor-made macromolecule resin and modified microcrystal wax under the complex catalysis of amido. It has excellent overbaking stability... view more

Carboxyl saturated polyester resin. Used together with epoxy resins in a (50:50) ratio. Exhibits excellent gloss, yellowing resistance, durability and good flow effect. Also shows a good mechanical... view more

Carboxyl saturated polyester resin. Used together with epoxy resins in a (50:50) ratio. Exhibits excellent gloss, yellowing resistance, durability and good flow effect. Also shows a good mechanical... view more

Carboxyl saturated polyester resin. Used together with epoxy resins in a (60:40) ratio. Exhibits excellent gloss, yellowing resistance, durability and good flow effect. Also shows a good mechanical... view more

Carboxyl saturated polyester resin. Used together with epoxy resins in a (60:40) ratio. Exhibits excellent gloss, yellowing resistance, durability and good flow effect. Also shows a good mechanical... view more

Carboxyl saturated polyester resin. Used together with epoxy resins in a (60:40) ratio. Exhibits excellent gloss, yellowing resistance, durability and good flow effect. Also shows a good mechanical... view more

HYNOWA™ CM-100 by Hynowa Hydrocarbon Resin is a low molecular weight, non-reactive, thermoplastic coumarone resin. It is recommended for printing ink and paints. HYNOWA™ CM-100 shows good thermal... view more

HYNOWA™ CM-110 by Hynowa Hydrocarbon Resin is a low molecular weight, non-reactive, thermoplastic coumarone resin. HYNOWA™ CM-110 shows good thermal stability, compatibility, viscidity, light... view more

HYNOWA™ CM-120 by Hynowa Hydrocarbon Resin is a low molecular weight, non-reactive, thermoplastic coumarone resin. HYNOWA™ CM-120 shows good thermal stability, compatibility, viscidity, light... view more

HYNOWA™ CM-90 by Hynowa Hydrocarbon Resin is a low molecular weight, non-reactive, thermoplastic coumarone resin. HYNOWA™ CM-90 shows good thermal stability, compatibility, viscidity, light... view more

Poly[[6-[(1,1,3,3-tetramethylbutyl)amino]-1,3,5-trazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]. Used as a light stabilizer... view more

Alymers HC 5001 by INOPOL is a carboxyl terminated polyester resin designed for use with epoxy resin (PE/epoxy: 50/50) in powder coatings. Exhibits excellent flow. It is produced from the... view more

Alymers HC 5301 by INOPOL is a carboxyl terminated polyester resin designed for use with epoxy resin (PE/epoxy: 50/50) in powder coatings. It is produced from the polymerization of diacids and... view more

Alymers HC 5401 by INOPOL is a carboxyl terminated polyester resin designed for use with epoxy resin (PE/epoxy: 50/50) in powder coatings. It is produced from the polymerization of diacids and... view more

Alymers HC 5501 by INOPOL is a carboxyl terminated polyester resin designed for use with epoxy resin (PE/epoxy: 50/50) in powder coatings. Exhibits very fast cure and good chemical resistance. It is... view more

Alymers HC 5601 by INOPOL is a carboxyl terminated polyester resin designed for use with epoxy resin (PE/epoxy: 50/50) in powder coatings. Exhibits good flow, high gloss and chemical resistance. It... view more