Sipomer® WAM E W50 by Syensqo is a methacrylate monomer. It improves wet adhesion and scrub resistance on aged alkyd, wood and other substrates. Used for all acrylic, styrene acrylic and vinyl acrylic... view more

Sipomer® WAM II by Syensqo is methacrylic monomer. Its composition is based on 46-50% methacrylamidoethyl ethylene urea (MAEEU). Provides enhanced mechanical properties and improved chemical- and water... view more

CYLINK® TAC by Syensqo is Tri-allyl cyanurate. It is a cost-effective, tri-functional, internal crosslinking monomer capable of forming homo-polymers and copolymers. Exhibits scrub resistance... view more

Synthanol 4403 by Synthecoat (Synthesia Group) is a solvent-free polyol. It is applicable in coatings. Synthanol 4403 is also available as solvent-based alkyd resin with viscosity (790-870 cP)... view more

Polyester polyol. It offers vinylic polymerization of monomers into the standard polyester matrix. Recommended for leather coatings... view more

Polyester polyol. It offers vinylic polymerization of monomers into the standard polyester matrix. Recommended for leather coatings... view more

Hoopol F-110-1000 by Synthesia is a polyester polyol. It is based on adipic acid and monoethylene glycol and/or diethylene glycol and/or 1,4 butanediol with functionalities between 2.0 and 2.7... view more

Hoopol F-113 by Synthesia is a polyester polyol. It is based on adipic acid and monoethylene glycol and/or diethylene glycol and/or 1,4 butanediol with functionalities between 2.0 and 2.7... view more

Polyester polyol. It offers vinylic polymerization of monomers into the standard polyester matrix. Recommended for leather coatings... view more

Oleic acid. It is a non-animal, Kosher approved, low odor, tall oil fatty acid derived product having a uniform fatty acid composition and water-white initial color. Contains low saturated acids and... view more

Oleic acid (= 89%). It is an exceptionally high purity, low titer & low odor grade derived wholly from tall oil fatty acid source having uniform fatty acid composition and water-white initial color... view more

Pamolyn™ 125 Oleic Acid by Synthomer is a high purity oleic acid. It is derived wholly from a tall oil fatty acid source. Exhibits low odor, high color stability and low titer point. It has high... view more

Pamolyn™ 150 Fatty Acid by Synthomer is a low odor fatty acid. It is derived wholly from a tall oil fatty acid source. Exhibits excellent color stability, low unsaponifiables and low titer point. It... view more

Pamolyn™ 200 Linoleic Acid by Synthomer is linoleic acid (9, 12-octanedecadienoic acid). It is of high purity, low odor and pale color with very low titer point. Derived wholly from a tall oil fatty acid source... view more

Benzyl Methacrylate is an acrylate monomer. Used in paints and coatings... view more

Benzyl acrylate is an acrylate monomer. Used in paints and coatings... view more

Butyleneglycol diacrylate is an acrylate monomer. Used in paints and coatings... view more

Butyleneglycol dimethacrylate is an acrylate monomer. Used in paints and coatings... view more

Dipentaerythrityl hexaacrylate is an acrylate monomer. Used in paints and coatings... view more

Dimeric 2, 4-toluene diisocyanate. It is a white powder with yellow tint. It is soluble in toulene, chlorobenzene and o-dichlorobenzene. It complies with following regulations: SARA 302, section... view more

3,4'-diaminodiphenylether. Used as a raw material for polymers such as aramids & polyimides and in coating agents... view more

Methyl terephthalaldehydate. Used in production of polymers and chemical intermediates... view more

Dimethyl terephthalate. It has a low melting point, neutral pH and is dissolved easily in methanol & other solvents. It reacts with chemical substances that are susceptible to degradation at high... view more

Methyl benzoate. Used as a raw material for polymers... view more

Methyl p-toluate. Used as a raw material for paint resins... view more

EM223 by Tianjin Golone Chemical is a flexible tripropylene glycol acrylate. It is a low viscosity UV monomer with low volatility. EM223 is suitable for use in coatings applications... view more

EM235 by Tianjin Golone Chemical is a fast curing pentaerythritol three acrylate (PET3A). Exhibits better hardness, crosslinking density, solvent resistance. EM235 is suitable for use in coatings... view more

EM39 by Tianjin Golone Chemical is a 2-hydroxy ethyl methacrylate phosphate (HEMAP). Exhibits good adhesion on metals. EM39 is designed for coatings applications... view more

M-55D by Tianjin Golone Chemical is a water-based special modified monomer. Exhibits excellent adhesion and high hardness. M-55D is suitable for use in glass paint and metal paint... view more

HS9630 is a 1,6-hexanediol diacrylate oligomer. Provides good dilution, good weatherability and good adhesion... view more

HS9101 by Tianyi Chemical Engineering Material is a modified epoxy acrylate. HS9101 provides fast curing property, good flexibility, hardness, anti-scratch and high cost performance... view more

HS9102 is a polyhydroxy dibasic acid modified epoxy acrylate 20% MIBK. Provides fast curing speed, chemical resistance and good adhesion... view more

HS9103 by Tianyi Chemical Engineering Material is a polyurethane modified epoxy acrylate 25% TPGDA. HS9103 provides high fullness, good flow, flexibility and wetting properties... view more

HS9104 is a polyurethane modified epoxy acrylate 20% TPGDA. Provides fast-curing, good flow, flexibility, high hardness, gloss and low shrinkage rate... view more

Bicyclo-[2.2.1] heptane (Synonyms: 2-Norbornylene, 2-Norbornene and Norcamphene). It is made by the Diels-Alder reaction of cyclopentadiene and ethylene, two readily available hydrocarbons. The... view more

Blended isocyanate of TDI (toluene diisocyanate) and MDI (methylene diphenyl diisocyanate). It is specially developed for cold cure system... view more

Blended isocyanate of TDI (toluene diisocyanate) and MDI (methylene diphenyl diisocyanate). It is specially developed for cold cure system... view more

Polyol modified isocyanate. Isocyanates are themselves produced by treating amines with phosgene via the formation of intermediate (carbamoyl chloride)... view more

Polyol modified isocyanate. Isocyanates are themselves produced by treating amines with phosgene via the formation of intermediate (carbamoyl chloride)... view more

Mixture of pure and polymeric MDI (methylene diphenyl diisocyanate). It exhibits superior compatibility with polyols. Used in spray foams... view more

Finecure FOC distributed by Toyotsu Chemiplas is an UV-curable resin with high transparency, rapid cure property and no solvents. It shows negative photo resistance and excellent substrate adhesion... view more

Finecure TS-01 distributed by Toyotsu Chemiplas is a UV-curable resin with excellent molding processability. It shows superior toughness and elasticity in comparison to conventional resins. It... view more

Finecure TS-02 distributed by Toyotsu Chemiplas is an UV-curable resin with excellent molding processability. It exhibits easy adhesion to PET and PC polymer. It shows superior toughness and... view more

Neojet FL distributed by Toyotsu Chemiplas is an UV-curable resin with excellent molding processability. It exhibits easy adhesion to PET, PC, TAC and glass. It has high transparency, excellent... view more

Neojet PAD distributed by Toyotsu Chemiplas is an UV-curable resin with excellent substrate adhesion to PET, PP, PC and TAC. It has high transparency, rapid cure property and no solvents. It reduces... view more

Non-ionic polyol. It is produced by sequential addition of two or more alkylene oxides to a low molecular weight organic compound. Due to its unique molecular structure, it is more soluble in cold... view more

Non-ionic polyol. It is produced by sequential addition of two or more alkylene oxides to a low molecular weight organic compound. Due to its unique molecular structure, it is more soluble in cold... view more

Non-ionic polyol. It is produced by sequential addition of two or more alkylene oxides to a low molecular weight organic compound. Due to its unique molecular structure, it is more soluble in cold... view more

Non-ionic polyol. It is produced by sequential addition of two or more alkylene oxides to a low molecular weight organic compound. Due to its unique molecular structure, it is more soluble in cold... view more

Non-ionic polyol. It is produced by sequential addition of two or more alkylene oxides to a low molecular weight organic compound. Due to its unique molecular structure, it is more soluble in cold... view more

HPP 6000-65 by U S Polymers Accurez Specialty Chemicals is aromatic polyester polyol. It provides good mechanical properties, skydrol resistance, flexibility and overall performance. It is used in... view more

HPP 6007 by U S Polymers Accurez Specialty Chemicals is a high solid, polyester polyol for solvent-borne coatings. It offers excellent flexibility, cross-link density, better QUV and gloss... view more

HPP 6031 by U S Polymers Accurez Specialty Chemicals is polyester polyol. It possesses very high toughness and air dry applications. It offers better overall performance in comparison to the... view more

HPP 7866 by U S Polymers Accurez Specialty Chemicals is silicone modified polyester polyol. It shows good mechanical properties (stain resistance, adhesion, flexibility). It provides chemical... view more

HPP 8543 by U S Polymers Accurez Specialty Chemicals is silicone modified hydroxy functional polyester polyol. It offers high performance, where excellent hydraulic-, solvent-, and water-resistance... view more

1, 12-Dodecanedioic acid (DDA). It offers excellent performance, especially in hydrolytic resistance, flexibility, and heat stability. Used as a raw material for polyurethane. Also used in the... view more

1, 5-Pentanediol. It is easier to handle than 1, 6-hexanediol since it has low melting point. The configuration of 1, 5-pentanediol results in rapid and simultaneous reactions in the formation of... view more

1, 6-Hexanediol. It contains terminally located hydroxyl groups which results in rapid and simultaneous reactions in the formation of numerous di-substituted products. Used in synthesis of specialty... view more

UPC group PL2100 is a phthalic anhydride type polyol monomer. It contains phthalic anhydride (PA) and diethylene glycol (DEG). Used in coatings... view more

UPC group PL2104 is a phthalic anhydride type polyol monomer. It contains phthalic anhydride (PA) and diethylene glycol (DEG). Used in coatings... view more

UPC group PL2104-S is a phthalic anhydride type polyol monomer. It contains phthalic anhydride (PA), diethylene glycol (DEG) and modifier. Used in coatings... view more

UPC group PL2178-S is a phthalic anhydride type polyol monomer. It contains phthalic anhydride (PA), diethylene glycol (DEG) and modifier. Used in coatings... view more

UPC group PL3100 is a phthalic anhydride type polyol monomer. It contains phthalic anhydride (PA), diethylene glycol (DEG) and modifier. Used in coatings... view more

Polyester polyol. It is 100% non-volatile and water reducible. Offers low-odor, greater formulation latitude and cost effective form of supply. Exhibits good hardness development, excellent solvent... view more

Aromatic polyester polyol. It is made from recycled and renewable resources. Economical to use and highly functional. Allows for higher strength values and less overall chemical usage. Applications... view more

Polyether polyol. It is composed of initiators including EDA (ethylenediamine), sorbitol, sucrose, glucoside, mannitol, triethanolamine, glycerin and PO (propylene oxide). Shows low thermal... view more

Hydrophilic polyether polyol. It exhibits excellent resilience, compression, comfort, moisture-retention and strength. Compatible with polyurethane... view more

Hydrophilic polyether polyol. It exhibits excellent resilience, compression, comfort, moisture-retention and strength. Compatible with polyurethane... view more

Polyether polyol. It is composed of a triol, PO (propylene oxide) and EO (ethylene oxide). Features good stability and variable/ adjustable amount of adjuvant during foaming process. Compatible with... view more

Polyether polyol. It is composed of a triol, PO (propylene oxide) and EO (ethylene oxide). Features good stability and variable/ adjustable amount of adjuvant during foaming process. Compatible with... view more