AXILAT™ DF 775 DD by Synthomer is a foam control agent based on a mixture of mineral oil and non-ionic surfactants on an inert carrier. It is APEO-free. Its advantages include excellent defoaming... view more

ROHAGIT SD 15 by Synthomer is an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. Acts as a thickening agent for polymer dispersions and other aqueous systems with a... view more

ROHAGIT SD 40 by Synthomer is a thermoplastic methacrylic acid-acrylic ester copolymer. It is UV stable, universal thickening agent for polymer dispersions and other aqueous systems with a pH value... view more

ROHAGIT SD 9523 by Synthomer is an anionic water-based dispersion of a butadiene acrylate copolymer. It acts as a thickener and is activated by increasing the pH from below neutral to about pH 9.0... view more

B8014-BM35 by Tianjin Boyuan New Materials is an odorless, highly pure, synthetic Boehmite alumina powder. Used as an inorganic additive in the absorbing layer of inkjet media. It is highly... view more

B8014-BM45 by Tianjin Boyuan New Materials is a highly pure, odorless, synthetic Boehmite alumina powder. Used as an inorganic additive in the absorbing layer of inkjet media. It is highly... view more

B8014-L4 by Tianjin Boyuan New Materials is a small particle size boehmite (aluminium oxide hydroxide). Exhibits high temperature resistance, excellent insulation, low hardness and good chemical... view more

B8203-A by Tianjin Boyuan New Materials is a water-based, odorless dripping and anti-fogging agent. It is non-toxic and non-polluting with long term durability. It can be diluted by adding deionized... view more

B8013-2 by Tianjin Boyuan New Materials is an odorless, highly transparent nano alumina. Exhibits excellent dispersibility. It increases transmittance by decreasing light reflectance. Designed for... view more

PANGEL® S9 by Tolsa is a mineral rheological additive for aqueous systems. Imparts excellent thixotropic and pseudoplastic properties. At rest, it provides the system with a high consistency, which... view more

PANGEL® B20 by Tolsa is a powdered rheological additive with a high thickening and anti-settling capacity for intermediate polarity systems. Imparts thixotropic, suspension and sagging-resistance to... view more

PANGEL® OM4 by Tolsa is an organobentonite clay. Acts as a thickener and leveling agent. It is a rheological additive for intermediate to low polarity systems. Provides thixotropic and pseudoplastic... view more

MICROSIL 100 by Tolsa is a microsphere of expanded perlite ore made of void multicellular and semi-spherical aluminum silicate particles. It allows an important reduction of the system density. It... view more

MICROSIL 200 by Tolsa is a microsphere of expanded perlite ore made of void multicellular and semi-spherical aluminum silicate particles. It reduces shrinking and crack formation and allows reducing... view more

AMPARMOR™ 1043 by Autonomic materials is a microcapsule containing a blend of healing agent based on silicone-based resins, co-crosslinking agents/ enhancers and adhesion promoters. It is a dual... view more

AMPARMOR™ 2000 series by Autonomic materials is a microcapsule containing a blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/ enhancers and adhesion... view more

AMPARMOR™ 3000 series by Autonomic materials is a microcapsule containing a blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/ enhancers and adhesion... view more

AMPARMOR™ 3013 by Autonomic materials is a microcapsule containing a blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/ enhancers and adhesion promoters... view more

Ketjenflex® 12 by Axcentive is a plasticizer used in inks, coatings and plastisols. Compatible with NC, PVB, CAB, acrylic and PVC/vinyl, resins. Bio-based, safe phthalate replacement. Ketjenflex® 12... view more

Ketjenflex® 8 by Axcentive is an adhesion promoting flexibilizer for solvent based inks based on NC, PU, vinyl, PA, and PVB. Particularly suited for adhesion promotion in lamination inks for... view more

Ketjenflex® CP by Axcentive is a high quality grade PTSA (98% crystalized). Catalyst based on paratoluene sulfonic acid used in reactions of many chemical systems. As such it is used in typically... view more

Ketjenflex® MH by Axcentive is a plasticizing coresin for overprint varnishes and solvent based inks based on NC, PU, and PA. Improves film toughness and aesthetics. In compliance with global... view more

Reducing Agent TP 1651 by Brüggemann is a formaldehyde-free reducing agent with high process robustness. It shows excellent performance for the emulsion polymerization of styrene acrylate based... view more

BRUGGOLITE® E28 by Brüggemann is a sodium salt of organic derivatives of sulfinic and sulfonic acid. It is a reducing agent for emulsion polymerization at low pH conditions. It is used in the... view more

BRUGGOLITE® FF6 M by Brüggemann is a sodium salt of an organic sulfinic acid derivative. It is a formaldehyde-free reducing agent for emulsion polymerization. It is applied in solution at a... view more

Dispersing Agent LP 18-007 by Brüggemann is a stable water-based blend of copolymers. It is an APE-, solvent- & VOC-free colorless liquid. It is a wetting and dispersing agent designed for pigment... view more

Reducing Agent LP 16-034 by Brüggemann is a sodium salt of a sulfonic acid derivative. It is suitable for coatings. It is used as an antioxidant for aqueous polymer dispersion and solid polymers to... view more

UCD® 2106N by Chromaflo Technologies incorporates an ultra-compatible proprietary methacrylate resin as the dispersion vehicle. The characteristics of the polyolefin dispersion in it can improve... view more

UCD® 2148Q by Chromaflo Technologies is a water-based silica paste that can be added to finished product to adjust gloss in-plant or in the field. It provides resistance to settling, hard-packing... view more

UCD® 2226N by Chromaflo Technologies is a solvent-based silica flatting paste which resists settling and hard-packing. It can be added to finished product to adjust gloss in-plant or in the field... view more

UCD® 2360N by Chromaflo Technologies is a ready-to-use paste that can be post-added to coatings, without any preparation, to provide pigment suspension and sag resistance. This bentone product is... view more

UCD® 9844N by Chromaflo Technologies is a multipurpose flow additive that provides sag control and pigment suspension with enhanced brushability and flow. It can be post-added. It has minimal... view more

Dispersogen® SP Plus by Clariant is a dispersing agent and stabilizer for silicate and organosilicate paints containing up to 10% water glass (28% active potassium silicate). It helps enhance the... view more

Dispersogen® 145 by Clariant is an APEO-free, low VOC (less than 1%) mixture of mono- and diester phosphoric acid based on long chain alkyl polyethylene glycols. Acts as a wetting- & dispersing... view more

Dispersogen® 1728 by Clariant is a low VOC (less than 1%) aqueous solution of a novolac derivative. Acts as an anionic stand-alone dispersing agent. Exhibits high pigment concentration, low... view more

Dispersogen® 2774 by Clariant is a non-ionic, low VOC (less than 1%) novolac alkoxylate. Acts as a dispersing agent. Compatible with water-borne alkyd resins, acrylic binder, polyurethanes (PU) and... view more

Dispersogen® 3169 by Clariant is a low VOC (less than 1%) aqueous solution of an anionic novolac derivative. Acts as a dispersing agent. Provides low viscosity, high pigment concentration, high... view more

Coadis™ 123 K by Coatex is a dispersing agent. Coadis™ 123 K is a synthetic, versatile dispersant recommended for a broad range of water-borne systems. Due to its hydrophobic character, it... view more

Coadis™ 144 A by Coatex is a dispersing agent. Coadis™ 144 A pigment dispersant is a universal, high performing hydrophilic copolymer which provides outstanding performance across a broad spectrum... view more

Coapur™ 975 W by Coatex is a water soluble non-ionic polyurethane. It is a solvent-, alkyl phenol ethoxylates (APEO)-, tin- and heavy metal free associative polyurethane thickener and opens new... view more

RHEOTECH™ 2800 by Coatex is an associative acrylic thickener. Its specific associative behavior allows RHEOTECH™ 2800 to provide a unique rheological balance between high, medium and low shear... view more

RHEOTECH™ 3800 by Coatex is an aqueous dispersion of an acrylic copolymer. Itis an associative, tin-free acrylic thickener designed to improve both the rheology and the color acceptance of water... view more

ZEFFLE™ GH-701 by Daikin is a fluorinated hydrophilic additive for self-cleaning solvent-borne coatings. When added to coatings, it creates a coating film which is resistant to stains as they can be... view more

Green Biologics C3-ONE (Renewable Acetone) is a clear, colorless, flammable, low-boiling, and volatile liquid recognized for its rapid evaporation and its faint aromatic, sweet odor. It is produced... view more

Green Biologics nC4-OL (Renewable n-Butanol) is 100% renewable n-butanol produced through fermentation of agriculturally derived sugars by Green Biologics’ proprietary Clostridium microbial... view more

Amirez® 142 by Incorez is a reactive emulsified waterborne polyamine curing agent for either liquid epoxy or emulsified epoxy resins. The product will undergo a chemical reaction with the epoxy... view more

Amirez® 148/010 by Incorez is a water-soluble reactive polyamine adduct curing agent with long pot life, low viscosity and high solids. It will emulsify most liquid epoxy resins. By chemical... view more

Amirez® 148/024 by Incorez is a reactive water soluble polyamine adduct curing agent with fast cure at ambient and low temperature. Possesses low viscosity, high solids and low color. It will... view more

Amirez® 148/055 by Incorez is a water soluble polyamine curing agent. It is designed to produce very tough and durable high gloss water-based surface coatings with both liquid and solid epoxy... view more

Incozol® 2 by Incorez is a mono-oxazolidine grade. Acts as an effective moisture scavenger and drying agent. It is ideal for use in two component aliphatic, clear polyurethane coatings and... view more

Tivida® FL 3000 by Merck KGaA, Darmstadt Germany is a non-ionic fluorosurfactant offering a strong combination of efficiency, performance and environmental friendliness. It is the most efficient... view more

"Tivida® FL 2500 by Merck KGaA, Damrstadt Germany is a top-performance ultrashort-chain anionic C3 fluorosurfactant that achieves a very low surface tension. It contains 30% active ingredient in... view more

"Tivida® FL 2300 by Merck KGaA, Damrstadt Germany is a high-speed, ultrashort-chain anionic C2 fluorosurfactant that lowers surface tension exceptionally quickly. It contains 30% active ingredient... view more

"Tivida® FL 2200 by Merck KGaA, Damrstadt Germany is a high-speed, ultrashort-chain anionic C2 fluorosurfactant that lowers surface tension exceptionally quickly. It contains 50% active ingredient... view more

PolyFox™ PF-136A by Omnova Solutions is an anionic fluorinated polyether diammonium disulfate polymer. Designed for aqueous coatings and inks. Acts as a fluorosurfactant, wetting, flow and leveling... view more

PolyFox™ PF-151N by Omnova Solutions is a 50% active, nonionic fluorinated polyether ethoxylated polymer. Acts as a fluorosurfactant, wetting, flow and leveling agent. Offers improved water... view more

PolyFox™ PF-154N by Omnova Solutions is a 25% active, fluorinated polyether ethoxylated polymer with non-ionic nature. Acts as a fluorosurfactant, wetting, flow and leveling agent. Exhibits... view more

PolyFox™ PF-156A by Omnova Solutions is an anionic fluorinated (C2F5) polyether polymer for aqueous formulations. Used in coatings and inks. Acts as a wetting, flow and leveling agent. It has the... view more

PolyFox™ PF-159 by Omnova Solutions is a 100% active, non-ionic, fluorinated (C2F5) polyether ethoxylated polymer with a diol structure. It is a high efficient wetting, flow and leveling agent... view more

Calfax® DB-45 by Pilot Chemical is Sodium Dodecyl Diphenyl Oxide Disulfonate. It is an excellent emulsifier. It contains no halogenated solvents and is compatible with a broad range of acids... view more

Calfax® 16L-35 by Pilot Chemical is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate. It offers superior solubility and stability in electrolyte solutions such as brine, bleach... view more

Masurf® FS-3335A by Pilot Chemical is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting and leveling. It provides... view more

Masurf® FS-3330A by Pilot Chemical is a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution for use in paints & coatings. It is a leveling agent, defoamer, flow and... view more

Calfax® 10L-45 by Pilot Chemical is Sodium Decyl Diphenyl Oxide Disulfonate. It is a water soluble surface active agent that contains no halogenated solvents. Acts as an emulsifier. Calfax® 10L-45... view more

HydroWax® 115 by Sasol is an anionic wax dispersion. HydroWax® 115 is used in industrial coatings... view more

HydroWax® 138 by Sasol is an anionic/non-ionic wax dispersion. HydroWax® 138 is used in industrial coatings... view more

HydroWax® 46 by Sasol is a cationic wax dispersion. HydroWax® 46 is used in industrial coatings... view more

HydroWax® RV by Sasol is an anionic/non-ionic wax dispersion. HydroWax® RV is used in industrial coatings... view more

MERKUR® 500 by Sasol is a petroleum jelly. In the production of printing inks, it serves significant reduction of tack without affecting the viscosity in the process. MERKUR® 500 is used in all... view more

WS 360 by Siliconi is an APEO-free, non-ionic antifoaming and deaerating agent designed for waterborne paints. It is VOC-free, odorless, biodegradable and easy to disperse into the paint... view more

C 400 by Siliconi is a non-ionic antifoaming agent based on organo-modified siloxanes. It combines persistent antifoam with a good compatibility. It is suitable for use in wood coatings, transparent... view more

WS 980 by Siliconi is an oil-based, non-ionic, APEO-free antifoaming agent. It is an odorless product exhibiting high stability. It is also a good deaerating for plastic coating blends. It is... view more

WS 974 by Siliconi is an oil-based antifoaming agent. It is also a good deaerating agent and it eliminates micro and macro foam. Suitable for use in production of decorative emulsion paints, high... view more

B 125 by Siliconi is an APEO-free non-ionic silicone antifoam agent in water emulsion, designed to control and eliminate foam in aqueous systems, especially in waterborne architectural paints. It... view more

CAB-O-SIL® CT-1221 by Cabot is fumed silica designed for powder coatings applications. It is a highly pure silica that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces many... view more

CAB-O-SIL® EH-5 by Cabot is a high surface fumed silica used to provide thickening, thixotropic (shear-thinning) and anti-settling behavior in liquid systems. Exhibits high purity, aggregated... view more

CAB-O-SIL® HS-5 by Cabot is a high surface area fumed silica. It can increase the viscosity of liquid coating by imparting thickening, thixotropy (shear-thinning), and anti-settling. Exhibits high... view more

CAB-O-SIL® L-90 by Cabot is a hydrophilic, easily dispersible, untreated fumed silica. Acts as a rheology modifier. Exhibits lowest surface area, high purity, submicron particle size, aggregated... view more

CAB-O-SIL® LM-150 by Cabot is an untreated, low surface area, hydrophilic fumed silica. Acts as a thickener. Imparts a moderate increase in viscosity & reinforcement in liquid and polymer systems... view more

Cellulose fiber. Curran® CV5000 by Cellucomp is based on novel fiber technology and derived from root crops. Offers a unique set of properties for water-based coatings. It is both green and... view more

DOWSIL™ 100F Additive by Dow is a fluorosilicone (1%) in diisobutyl ketone. Acts as a defoaming agent. It exhibits good surface appearance even after long-term storage. Provides efficient foam... view more

DOWSIL™ 102F Additive by Dow is a fluorosilicone (1%) in mixture of methyl ethyl ketone and n-propyl acetate. Acts as a defoaming/anti-foaming agent. Exhibits low tendency to cause craters and does... view more

DOWSIL™ 108F Additive by Dow is an alkylphenol ethoxylates (APEO)-free silicone (siloxane-based) emulsion grade. Acts as a foam control agent. Exhibits good dispersibility and low tendency to cause... view more

DOWSIL™ 11 Additive by Dow is a reactive silicone glycol surfactant with carbinol functionality. It acts as a mar-resistance, leveling, wetting, defoaming and dispersing agent in solvent based... view more

DOWSIL™ 14 Additive by Dow is a reactive silicone glycol surfactant with carbinol functionality in isopropanol. Used to provide slip, leveling and mar resistance in water- and solvent-based... view more