OK
The Universal Selection Source:
Coatings Ingredients
Online Course

FTIR Made Easy for Better Identification of Plastics

This is a Past Course

Recorded on Aug 29, 2017

Efficiently characterize your materials & analyse failures by mastering Fourier Transform Infrared Spectroscopy (FTIR) & better analyzing graphs.

Jeff Jansen, a leading expert analyst will discuss:
  • Plastics characterization (identification, contamination...) with real life examples
  • Failure analysis by identifying the root cause & how to minimize them
  • How FTIR can be complemented with other techniques like DSC, TMA, TGA...

Read the full Course Outline

Presented By:
Jeffrey Jansen
Length: 90 min

Course Type: Formulation
Level: Intermediate

Add Recorded Course to your Cart

Package includes:

.wmv Courses Recording, Presentation Slides & Transcript of Q&A session

Why should you view this course?

Fourier transform infrared spectroscopy (FTIR) is a powerful analytical technique for the development of polymer materials. Mastering FTIR can not only enable you to characterize materials (through changes in molecular structures) but also ease problem solving and minimize failures. Join the course and:

  1. Extract more value (extent of oxidation, crosslinking, ingredient inclusion..) out of complex spectra/data obtained from FTIR on your plastics
  2. Ease failure analysis by identifying the root cause & recognizing clearly polymers, contaminants, degraded forms and unknown molecules in a mixture with FTIR & other techniques (DSC, TGA, TMA...)
  3. Save time characterizing your material with practical guidance to overcome sample preparation issues (solids analysis, additive tracing...)
FTIR

Who should view this course?

Material Scientists, Engineers, Quality Control professionals who find difficulties in analyzing FTIR results as a part of material characterization & problem solving.

Course Outline

The following sections will be covered during this session:

  1. Theory Behind the Technique (brief coverage of the principles of FTIR)

  2. FTIR Applications to Characterize Polymeric Materials / Information That FTIR Can Provide (through case studies)
    • Material Identification
    • Contamination
    • Degradation

  3. Overcoming Challenges in Sample Preparation (how to get the data needed out of the experiment)

  4. Interpreting the Test Results

  5. When and How to Supplement FTIR With Other Techniques to Get the Most Information (DSC, TGA, Mass Spectroscopy)

  6. Failure Analysis – Mechanism & Causes

  7. Cases Studies (showing FTIR alone and with other techniques)
    • Failure of a polycarbonate vehicle grille
    • PTFE and Aramid modified polycarbonate clips
    • and many more...

  8. 30mins Q&A- Ask your questions directly from the expert !

Currency Converter Add To Cart

Members Reviews

Speaking directly to an expert was very useful. Loved the enthusiasm from Jeff! He answered questions fully & gave a good broad explanation of FTIR & supplementary techniques.

Sarah J. , from NIRI

It is very good to hear from a lecturer with extensive real-world experience rather than (or in addition to) just academic knowledge. The specific examples, anecdotes, and advice regarding specific materials is invaluable.

R&D Manager , from Quantum Leap Packaging

An Excellent Course! Helped better understand the concepts behind FTIR and the basics of how to perform/analyze a test.

Eileen W. , from Shawcor Ltd.

Excellent! It gave me a good introduction to the use of FTIR for plastics analysis.

Megan C. , from Lonza Inc.

Gave me a lot of insight to use other techniques combining FTIR-analysis. I learnt about the other techniques - ATR-Crystals, for which compounds it can be used- carbon filled, non-carbon filled etc.

Niek K. , from ERT BV

Courses You May Also Like :

Best Combine DMA, DSC, FTIR... for Optimal Material Analysis Best Combine DMA, DSC, FTIR... for Optimal Material Analysis
DSC Interpretation Made Easy for Plastics Optimization DSC Interpretation Made Easy for Plastics Optimization
Reducing Environmental Stress Cracking in Plastic Parts Reducing Environmental Stress Cracking in Plastic Parts
Creep Failure: Prediction and Prevention Strategies Creep Failure: Prediction and Prevention Strategies
PSA Testing: Standard Tests When There Is No Standard PSA Testing: Standard Tests When There Is No Standard
DMA Interpretation Made Easy for Plastics & Rubber Developments DMA Interpretation Made Easy for Plastics & Rubber Developments

Your cart

The shopping cart is empty.

Back to Top