OK
The Universal Selection Source:
Coatings Ingredients
Product News

Aremco Develops Corr-Paint™ CP2000, a Corrosion-resistant Coating for Steel Motor Housings

Published on 2015-03-13. Author : SpecialChem

 Aremco Products, Inc. has developed Corr-Paint™ CP2000, a new high performance coating. It is now used as a corrosion resistant coating for steel motor housings found in applications to 400 ºF (204 ºC).

Aremco’s Corr-Paint™ CP2000 is a single part, low viscosity, polymeric coating that dries and cures at room temperature to a hard, non-porous, abrassion resistant surface. CP2000 is extremely resistant to hydrochloric, nitric, ethylene chloride and sulfuric acids, and has also survived long-term salt fog, salt spray and humidity testing of over 1000 hours. 

Corr-Paint™ CP2000 is supplied with a viscosity of 200-240 cP, specific gravity of 1.05 g/cc, solids by volume of 49.0%, and a solids by weight of 67.0%. It is typically applied in a 4.0 mil wet film thickness that dries to approximately 2.0 mils. The theoretical coverage rate in a 1.0 mil dry film is 722 ft2/gal.

Corr-Paint™ CP2000 can be used in combination with Aremco’s Corr-Prep™ CPR2000, a solution that is used to prepare extremely smooth surfaces for coating. CP2000 can also be applied directly to severely rusted surfaces found in many maintenance and repair applications. Application methods include brush, roller or conventional pneumatic spray equipment. 

Typical applications include the coating of OEM components such as motor housings, bag houses, cyclones, hoppers, pipelines and precipitators, to the coating of large structures found in MRO applications throughout the power, pulp and paper, and chemical processing industries.

CP2000 is available from stock in pint, quart, and gallon quantities. Please contact Aremco’s Technical Sales Department for more information about this advanced coating, or read more.

About Aremco Products, Inc


Aremco’s advanced material division is one of the leaders in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200 ºF. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments. Industries served include automotive, aerospace, chemical processing, metallurgical, power generation and semiconductor.

Source: Aremco Products, Inc



Improve the durability of PU coatings
The 6th Annual Chemicals Sales & Marketing Toolbox
Back to Top