The Universal Selection Source:
Coatings Ingredients
Industry News

Tomsk Polytechnic University Scientists Develop Coatings for Cutting Tools

Published on 2016-03-18. Author : SpecialChem

Scientists of Tomsk Polytechnic University create coverings for next generation cutting tools, they will be not only durable, but also suitable for the treatment of most materials. Polytechnicers develop a technology to produce diamond thin films and cubic boron nitride from a gas mixture.

Fig. 1: Tomsk Polytechnic University Scientists
Develop Coatings for Cutting Tools

Diamond coatings due to their hardness have been widely used in the manufacture of cutting tools. They are used for the treatment of some metal alloys, ceramics, carbon composites, but ineffective for the iron and steel: at high temperature carbon interacts with these metals and gradually collapses.

To resolve this problem, TPU scientists proposed to develop a composite coating based on diamond and cubic boron nitride. It is the hardest known material.

Cubic boron nitride is not destroyed by contact with iron and steel, which makes the tool almost “invincible”.

“Nobody has synthesized cubic boron nitride coatings in the form of polycrystalline carbon yet. We want to use the crystal lattice proximity of the substance and diamond. This similarity allows growing crystals of cubic boron nitride on diamond crystals.

Our coating that integrates the properties of diamond and nitride coatings, will be applicable to most metals,” - explains Stepan Linnik, a research engineer from the TPU Institute of High Technology Physics.

The scientists of Tomsk Polytechnic University obtain coverings from gas by means of plasma. The university has developed a diamond sputtering technology from a mixture of methane and hydrogen. Cubic boron nitride will be also obtained from gas: a source material will serve diborane. Thus, the scientists will be able to cover a carbide tool with thin films, increasing its strength at times.

To be reminded, in 2015, Stepan Linnik’s study was supported by the Russian Foundation for Basic Research (RFBR): the polytechnicer won a grant in the amount of 5.1 million rubles for three years. Earlier the scientist was involved in the program “TPU postdoc”. It allows young PhD to work on a cutting edge project, which is conducted by an experienced leader. According to Stepan Linnik, this mentor for him was Professor Remnev, and the program provided an opportunity to start his own research, to approach the grant and to attract funding for his projects.

At the beginning of 2016 Stepan Linnik also received a grant from the President of the Russian Federation for young scientists for the development of the diamond coating deposition technology.


Cubic boron nitride - a substance that has an exceptional hardness at high temperatures, it can be used at very high cutting speeds. Widely used as a superhard material which only slightly inferiors to the hardness of diamond, but is significantly superior in heat resistance.

About Tomsk Polytechnic University

Tomsk Polytechnic University (TPU) has produced generations of graduates who have gone on to become leaders in all areas of society and industry. Since its foundation in 1896, TPU has always been a polytechnic institution with a wide range of research and higher education.

Source: Tomsk Polytechnic University

PS: If you liked this News, you might enjoy our Coatings Industry Newsletter. All the Industry News delivered twice a week right to your inbox. Sign up here!

Channel Alerts

Receive weekly digests on hot topics

Back to Top