OK
The Universal Selection Source:
Coatings Ingredients
Industry News

ThyssenKrupp Installs Chemcoater at Siegerland Plant to Enhance Workflow on its Coil Coating Line

Published on 2012-02-13. Author : SpecialChem

The new chemcoater on coil-coating line 3 at the Siegerland location of ThyssenKrupp Steel Europe significantly improves workflows on the coil-coating line - where paint and film coatings are applied to thin steel sheet - and actively contributes to protecting the environment.

Significantly Less Wastewater, Reduced Use of Alloying Elements and Chemicals

The chemcoater is a piece of equipment used in the steel industry to apply chemical substances to galvanized flat carbon steel. These substances are water-based media with additives that pretreat the steel and increase the corrosion protection of subsequent paint and film coatings. The chemcoater carries out chemical pretreatment processes required for the subsequent painting process. A total of three different chemicals can be applied to the sheet via rolls. The unit operates on the basis of a reuse process so that no wastewater is produced except in the subsequent rinsing operation. "This six million euro investment virtually eliminates the need for chromium-based corrosion-protection pretreatments for organically coated parts," says Team Coordinator Ralf Wittkowski. "By using zinc-magnesium hot-dip coated starting material, we achieve better corrosion protection results with thinner zinc coatings. Water consumption is also reduced: By using two five-stage cascade rinses we have reduced the amount of water we need by 8,000 liters per hour."

Extensive modernization

The planning phase for the extensive modernization of coil-coating line 3 began three years ago, and the project was finally implemented last fiscal year. During the three-week shutdown when the chemcoater was installed, maintenance and cleaning work to ensure defect-free operation of the line was carried out. The paint- and film-coated steel produced on coil-coating line 3 is supplied in the form of coil, slit strip and cut-to-length sheets for use in the construction, appliance, garage door and auto industries.

About ThyssenKrupp

At ThyssenKrupp 180,000 employees in around 80 countries work with passion and expertise to develop solutions for sustainable progress. Their skills and commitment are the basis of its success. In fiscal year 2010/2011 ThyssenKrupp generated sales of €49 billion.

For ThyssenKrupp, innovations and technical progress are key factors in managing global growth and using finite resources in a sustainable way. With its engineering expertise in the areas of "Material", "Mechanical" and "Plant", it enable its customers to gain an edge in the global market and manufacture innovative products in a cost- and resource-efficient way. The basis for this is responsible corporate governance geared towards long-term value growth. In an ever-changing business environment it is continuously evolving the company to enable it to meet the global challenges of the future with innovative solutions.

Source: ThyssenKrupp


FEICA 2018 European Adhesive and Sealant Conference and EXPO
Back to Top