The Universal Selection Source: Coatings Ingredients

by SpecialChem

Mowilith® DM 611

Technical DataSheet | Supplied by Celanese

Discontinued : product no longer available

Plasticizer-free aqueous dispersion based on styrene and an acrylic acid ester. It has medium viscosity size fine particle. It has very good water resistance and good resistance to alkalis. It has a very high acceptance capacity fillers and pigments. It is crack free and flexible. The film is tough and elastic. To decrease the minimum temperature film formation, plasticizers and even solvents are used. Used in plastic coatings, glossy and semi-glossy paints and lacquer.

Mowilith® DM 611 Product details

Product Type
Chemical Composition
Physical Form
Product Status
Applications/ Recommended for
  • xxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx

Mowilith® DM 611 Properties


Value & Unit
Test Condition
Test Method
Solid content, (DIN 53189 / ISO 1625)
xxxxxxx %
Viscosity ( ISO 2555; 23 °C), Brookfield RVT; Needle 5; 20 min
xxxxxxxxxx cP
pH value, (DIN 53785 / ISO 1148)
Minimun film forming temperature (MFT) (DIN 53787 / ISO 2115)
xx °C
Low-temperature stability
xxx °C
Particle diameter
xxxx um
Density (DIN 53479)
xxxx g/cm3
Water absorption, after 24 hours water immersion (DIN 53495)
xx %
Glass transition temperature (DIN 53765) lower limit (DDK, speed calentamiento 10K/ min)
xx °C
Tensile strength, at 23°C and 50% relative humidity (DIN 53455)
xx N/mm2
Elongation at break, at 23 °C and 50% relative humidity (DIN 53455)
xxx %
Last edited Jun 8, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Boost your visibility on Specialchem
Back to Top