The Universal Selection Source: Coatings Ingredients

This innovative platform of varnish and coating solutions enables formulators to develop outstanding high temperature resistant coatings that are adapted a wide variety of formulations specificities. It provides to paint producers the possibility to each the highest  temperature resistance requirements or develop waterborne solution to meet the severe regulation and labeling on chemical substance.

New extreme high heat resistant polytitanocarbosilanes

How far do you need to go in terms of extreme high heat resistance? Are there also features such as corrosion resistance that you cannot compromise on for your formulation?

Unfortunately, current solutions such as silicone-based resins have limitations. Common resins can hardly endure temperature higher than 650 °C  (peak) and do not provide the corrosion resistance expected. 

A new polytitanocarbosilanes varnish will enable you to go beyond current limitations thanks to:

  • Extreme high heat resistance: up to 800°C!
  • Thermal shock resistance
  • Improved corrosion resistance characteristics compared to silicone
  • Excellent chemical and mechanical resistance

You will find a few key facts for this high heat resistant polytitanocarbosilanes.

Extreme high heat
Up to 800°C applicable temperature range
30 times higher heat resistance duration vs silicone: More than 500 hours (at 500°C)
Over 10 repetitions 600°C room temperature
Corrosion and
oxidation resistance
Over 500 hours resistance to salt-spray (vs 24 hours with silicone)
Over 3000 hours corrosion resistance in water (vs 48 hours with silicone)
Chemical and
mechanical resistance
1000 hours resistance immersion in: 80°C water, 10% NaOH/HCl/NaCl solution, Xylene
Excellent mechanical resistance with 6H pencil hardness (vs 2H with Silicone)

Get more comparative data about this high heat resistant polytitanocarbosilanes:
Download the casestudy technical discussion


Case Studies from High heat solutions

Go beyond temperature resistance boundaries in your protective coating with 500°C continuous resistance and up to 800°C peak!

Protective coatings is a challenging application and current solutions, such as silicone, are not able to endure temperature higher than 550°C (peak) for more than 16 hours and are not providing a satisfying level of chemical and mechanical resistance. Would you value a coating capable of resisting to extreme temperature up to 800°C (peak temperature) and to 500°C continuously?

Exceed current high heat solutions overall performances with this brand new polytitanocarbosilanes based materials available as a resin or a ready to use film coating providing higher temperature resistance, improved chemical, mechanical and corrosion resistance compared to silicon!


Get high heat resistance with the best-in class NMP-free Polyimide Varnish: up to 550°C at 5% weight loss properties!

Get high heat resistance with the best-in class NMP-free Polyimide Varnish: up to 550°C at 5% weight loss properties!

A new NMP-free Polyimide Varnish coating material has been developed enabling high heat resistance formulation, easier handling with room temperature storage and can be customized to your application and process!

It allows the combination of high heat resistance, electrical insulation and chemical resistance with easy processing to develop protective coatings. An exclusive grade has also been developed for waterborne system with over 85% VOC reduction!


Back to Top